This is an old revision of the document!
Flowdepth.f90
FlowdepthSolver
Depth
or Height
(user defined)FreeSurf
, FreeSurfGrad1
, FreeSurfGrad2
(FreeSurf
name is user defined)
This solver computes the vertical distance from a surface (either free surface or bedrock in Glaciology). In structured FD-grids this is a trivial procedure - not so in unstructured FEM meshes as used by Elmer. A degenerated Poisson equation has to be solved in order to get nodal values for either the flow depth below the free surface or the flow height above the bedrock. It can also compute the horizontal derivative of the upper/lower surface if Depth
/height
is calculated.
Alternatively, if you are using a structured mesh, you might consider replacing the FlowDepth solver
by the StructuredProjectToPlane solver, as explained here.
==== Examples ====
An example using the FlowDepth Solver can be found in
[ELMER_TRUNK]/elmerice/examples/Test_FlowDepth''.