Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
whowhat [2016/11/16 09:05]
tzwinger [Calving]
whowhat [2018/12/28 13:32] (current)
mondher [Calving]
Line 7: Line 7:
  
 ==== Hydrology ==== ==== Hydrology ====
-  * Model by Mauro Werder, based on GlaDS (Glacier Drainage System model, Werder et al., submitted JGR 2013), based on the empirical Darcy-Weishbach law (turbulent flow) for both the water sheet and the channels. Channels stand on the edges of the surface elements. **Contact:​** Mauro Werder (SFU, Vancouver), Olivier Gagliardini (LGGE, Grenoble)+  * Model by Mauro Werder, based on GlaDS (Glacier Drainage System model, Werder et al., submitted JGR 2013), based on the empirical Darcy-Weishbach law (turbulent flow) for both the water sheet and the channels. Channels stand on the edges of the surface elements. **Contact:​** Mauro Werder (SFU, Vancouver), Olivier Gagliardini (IGE, Grenoble)
   ​   ​
  
 ==== Calving ==== ==== Calving ====
   * Model developed by Joe Todd, following the work by Sue Cook, based on a crevasse depth criteria. Development of solvers to interpolate the variables from the old to the new mesh after a calving event. **Contact:​** Joe Todd (Univ. St. Andrews, Scotland - earlier SPRI, Cambridge) ​   * Model developed by Joe Todd, following the work by Sue Cook, based on a crevasse depth criteria. Development of solvers to interpolate the variables from the old to the new mesh after a calving event. **Contact:​** Joe Todd (Univ. St. Andrews, Scotland - earlier SPRI, Cambridge) ​
-  * Model developed by Jean Krug, based on damage mechanics and linear elastic fracture mechanics for the calving criteria. **Contact:​** Jean Krug and Gaël Durand (LGGE+  * Model developed by Jean Krug, based on damage mechanics and linear elastic fracture mechanics for the calving criteria. **Contact:​** Jean Krug and Gaël Durand (IGE
-  *  Integration of discrete particle model (HiDEM) or by data prescribed calving in Elmer/Ice simulation. Workflow done within eSTICC by Dorothée Vallot (Uppsala) and Shahbaz Memon (Univ. Iceland). **Contact**:​ Jan Åström and Thomas Zwinger (CSC), Workflow: Shahbaz Memon +  *  Integration of discrete particle model (HiDEM) or by data prescribed calving in Elmer/Ice simulation. Workflow done within ​Nordic Centre of Excellence (NCoE eSTICCby Dorothée Vallot (Uppsala) and Shahbaz Memon (Univ. Iceland). **Contact**:​ Jan Åström and Thomas Zwinger (CSC), Workflow: Shahbaz Memon 
  
 ==== Ice Temperature ==== ==== Ice Temperature ====
-  * Enthalpy model in development by Adrien Gilbert, including a solver for water percolation in firn. **Contact:​** Adrien Gilbert (LGGE)+  * Enthalpy model in development by Adrien Gilbert, including a solver for water percolation in firn. **Contact:​** Adrien Gilbert (IGE)
  
 ==== Anisotropy ==== ==== Anisotropy ====
Line 26: Line 26:
   * Deformation and partitioning + extrusion of vertically structured meshes   * Deformation and partitioning + extrusion of vertically structured meshes
   * Application on ice-sheet scale   * Application on ice-sheet scale
-  * **Contact**:​ Mika Malinen and Thomas Zwinger (CSC), Fabien Gillet-Chaulet (LGGE)+  * **Contact**:​ Mika Malinen and Thomas Zwinger (CSC), Fabien Gillet-Chaulet (IGE)
  
 ==== Deformable sediment ==== ==== Deformable sediment ====
Line 38: Line 38:
 ==== Coupling with an ocean model ==== ==== Coupling with an ocean model ====
   * project by Rupert Gladstone (Rovaniemi) to couple ROMS (Regional Ocean Modelling System, developed to include sub shelf processes by Ben Galton-Fenzi) with an ice flow model, potentially Elmer/​Ice. ​   * project by Rupert Gladstone (Rovaniemi) to couple ROMS (Regional Ocean Modelling System, developed to include sub shelf processes by Ben Galton-Fenzi) with an ice flow model, potentially Elmer/​Ice. ​
-  * project to implement a Plume model in Elmer/Ice, starting October 2013 by Nicolas Jourdain (LGGE)+  * project to implement a Plume model in Elmer/Ice, starting October 2013 by Nicolas Jourdain (IGE)
  
 ==== Permafrost model ==== ==== Permafrost model ====
-  * project ​by Denis Cohen, Juha hartikainen ​(Tampere), Peter Råback and Thomas Zwinger to have an integrated ​Enthalpy formulation to be solved in the ice as well as the bedrock. Starting from simple mixture models, the plan is to develop a system of equations including salinity and liquid phase transport. Updates are being pushed to branch "​permafrost"​. Contact Thomas Zwinger+  * Project ​by Denis Cohen, Juha Hartikainen ​(Tampere), Peter Råback and Thomas Zwinger ​(CSC) to apply an Enthalpy formulation to be solved in the ice as well as the bedrock. Starting from simple mixture models ​(Cuttler et al., 2000), the plan is to develop a system of equations including salinity and liquid phase transport. Updates are being pushed to branch "​permafrost"​. Contact Thomas Zwinger
  
 ==== Coupling with a RCM ==== ==== Coupling with a RCM ====
whowhat.1479287105.txt.gz · Last modified: 2016/11/16 09:05 by tzwinger
CC Attribution-Share Alike 4.0 International
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0