Search found 2342 matches
- Today, 13:00
- Forum: ElmerSolver
- Topic: Advice on solver settings for MagDyn
- Replies: 3
- Views: 18
Re: Advice on solver settings for MagDyn
You could try and specify the components of the field and leave the block un-rotated Boundary Condition 2 Target Boundaries(1) = 2 Name = "Back" Magnetic Field Strength 1 = Real -2500 Magnetic Field Strength 2 = Real -2500 End where the values depend on the rotation of the field in the cube.
- Today, 11:58
- Forum: ElmerSolver
- Topic: Advice on solver settings for MagDyn
- Replies: 3
- Views: 18
Re: Advice on solver settings for MagDyn
The far field boundaries specify the tangential components of the magnetic field H = (1/μ)B and the normal component of current density J = σE′. Your model is in cartesian so the farfield is rotated to the coordinate system. Because of this often you will see the far field as a sphere not a cube. Th...
- Yesterday, 23:06
- Forum: General
- Topic: Is Elmer The Right Tool to Learn to Model a MHD drive
- Replies: 1
- Views: 14
Re: Is Elmer The Right Tool to Learn to Model a MHD drive
Elmer may be the only tool. It is certainly the only tool that is open source and free to use. It is definitely the easiest to use and learn,
- Yesterday, 23:02
- Forum: ElmerGUI
- Topic: Model induction between two coils
- Replies: 17
- Views: 132
Re: Model induction between two coils
There are two options. 1. You can set the message level such that you see the result for each iteration and compare it to the convergence criteria. Or if it converges prior to to the max iterations set you know it converged to the criteria. e.g. Elmer out puts 820 0.2350E-06 830 0.2391E-06 840 0.190...
- Yesterday, 20:52
- Forum: External tools
- Topic: ElmerGrid -increase generates elementtype 0 and elmersolver then fails
- Replies: 1
- Views: 6
Re: ElmerGrid -increase generates elementtype 0 and elmersolver then fails
If you do
ElmerGrid 2 2 mesh -autoclean -increase
it works
ElmerGrid 2 2 mesh -autoclean -increase
it works
- Yesterday, 19:15
- Forum: ElmerGUI
- Topic: Model induction between two coils
- Replies: 17
- Views: 132
Re: Model induction between two coils
The problem is the more complex one has not converged. One issue with iterative solvers, is every iteration is a solution, but it might not be a converged solution. By default Elmer moves on when the number of specified iterations has taken place, even if convergence is not reached. If you change to...
- Yesterday, 17:29
- Forum: ElmerGUI
- Topic: Model induction between two coils
- Replies: 17
- Views: 132
Re: Model induction between two coils
When i run the mesh you posted with the sif you posted it looks OK to me
What version of Elmer are you running?- Yesterday, 17:13
- Forum: ElmerGUI
- Topic: Model induction between two coils
- Replies: 17
- Views: 132
Re: Model induction between two coils
You have no BCs at the ends, only a desired coil current specified in the solver. I let the solver calculate the coil current, and specify the potential at each end. ! CoilSolver Solver 1 Exec Solver = Before All Equation = CoilSolver Procedure = "CoilSolver" "CoilSolver" Linear ...
- Yesterday, 17:05
- Forum: ElmerGUI
- Topic: Model induction between two coils
- Replies: 17
- Views: 132
Re: Model induction between two coils
Is it possible to zip and post the mesh?
- Yesterday, 13:13
- Forum: ElmerGUI
- Topic: Model induction between two coils
- Replies: 17
- Views: 132
Re: Model induction between two coils
Are you sure the BCs are at each end of the coil?