May I make bold to interrupt you , I have been redoing as the courses says(http://elmerice.elmerfem.org/courses-tutorials),the IMO - Reykjavik - 27-29 October 2014. I can do the separate two materials .
I see the sliding process you do is I want to add,but when I combine the two materials ,some problems happen. the errors is as follows:
Code: Select all
Boundary Condition 2
Name = "bedrock"
"bedrock"
Target Boundaries = 1
1
Bottom Surface = Variable Coordinate 1
Variable Coordinate 1
Real cubic
At line 801 of file /home/zlf/elmer/elmerfem/fem/src/GeneralUtils.F90 (unit = 27, file = '�Gៈ')
Fortran runtime error: File 'DEM_TR_bed.dat' does not exist
The sif I changed:
Code: Select all
Boundary Condition 2
Name = "bedrock"
Target Boundaries = 1
! include the bedrock DEM, which has two colums
Bottom Surface = Variable Coordinate 1
Real cubic
include "DEM_TR_bed.dat"
End
Normal-Tangential Velocity = True
Velocity 1 = Real 0.0e0
Slip Coefficient 2 = Variable Coordinate 2
Real MATC "(1.0 - (tx > 300.0)*(tx < 400.0))*1000.0 + 1.0/100.0"
End