Recently I was doing some research in the antarctica ice berg ,I am trying using the elmer/ice model to simulating the dynamics and thermodynamics . when I do this ,I encounter many problem,can any one give me some help?

my problem as folows :

first ,the sliding section . http://elmerfem.org/forum/viewtopic.php?f=21&t=4012&sid=cd9ddd3b1a806c68c479f744e6d625afas this paper say ,I encounter the same question,I do not know the differences between the two units,and I just don't know How I set the Slip Coefficient 2 and the Slip Coefficient3.

second ,when I set the two parameters as

Flow Force BC = Logical True

Normal-Tangential Velocity = Logical True

Velocity 1 = Real 0.0e0

Slip Coefficient 2 = Real 1000

Slip Coefficient 3 = Real 1000

I obtain a velocity as follows:

I find the velocity is very big .I just do not know the unit of the velocity.

third,I have not sucessfully the transient simulation and every time the problem as follows

StructuredMeshMapper: >Correct Surface< in case of intersecting upper and lower surface

StructuredMeshMapper: Adjusting upper surface to maintain minimum height to: 0.1000E+01

FlowdepthSolver: Memory allocation done.

FlowdepthSolver: Gradient of -0.1000E+01 applied

ComputeChange: NS (ITER=1) (NRM,RELC): ( 1461.5746 2.0000000 ) :: flowdepth

6 0.5581E-04

ComputeChange: NS (ITER=1) (NRM,RELC): ( 0.31434882E-02 2.0000000 ) :: navier-stokes

6 0.3257E-04

ComputeChange: NS (ITER=2) (NRM,RELC): ( 4.7611171 1.9973608 ) :: navier-stokes

6 0.4033E-04

ComputeChange: NS (ITER=3) (NRM,RELC): ( 668.09704 1.9716962 ) :: navier-stokes

5 0.9756E-04

ComputeChange: NS (ITER=4) (NRM,RELC): ( 18348.357 1.8594697 ) :: navier-stokes

5 0.8676E-04

ComputeChange: NS (ITER=5) (NRM,RELC): ( 167891.39 1.6059196 ) :: navier-stokes

5 0.7492E-04

ComputeChange: NS (ITER=6) (NRM,RELC): ( 735774.68 1.2568432 ) :: navier-stokes

7 0.7430E-04

ComputeChange: NS (ITER=7) (NRM,RELC): ( 4189989.2 1.4025092 ) :: navier-stokes

7 0.4910E-04

ComputeChange: NS (ITER=8) (NRM,RELC): ( 10082247. 0.82569508 ) :: navier-stokes

6 0.4472E-04

ComputeChange: NS (ITER=9) (NRM,RELC): ( 13478271. 0.28828093 ) :: navier-stokes

4 0.5723E-04

ComputeChange: NS (ITER=10) (NRM,RELC): ( 14112872. 0.46000357E-01 ) :: navier-stokes

2 0.7456E-04

ComputeChange: NS (ITER=11) (NRM,RELC): ( 14156438. 0.30821840E-02 ) :: navier-stokes

1 0.5027E-04

ComputeChange: NS (ITER=12) (NRM,RELC): ( 14165516. 0.64110647E-03 ) :: navier-stokes

ComputeChange: NS (ITER=1) (NRM,RELC): ( 12.431605 2.0000000 ) :: sij

ComputeChange: NS (ITER=2) (NRM,RELC): ( 12.476920 0.36385089E-02 ) :: sij

ComputeChange: NS (ITER=3) (NRM,RELC): ( 13.013476 0.42098643E-01 ) :: sij

ComputeChange: NS (ITER=4) (NRM,RELC): ( 0.16314306 1.9504750 ) :: sij

ComputeChange: NS (ITER=5) (NRM,RELC): ( 0.61319196 1.1594193 ) :: sij

ComputeChange: NS (ITER=6) (NRM,RELC): ( 0.73213325 0.17682162 ) :: sij

ComputeChange: NS (ITER=1) (NRM,RELC): ( 239530.40 2.0000000 ) :: deformationalheat

TemperateIceSolver (temp): Memory allocation done

0 : 0 ghost nodes

TemperateIceSolver (temp): Limited diffusion Solver for variable temp

TemperateIceSolver (temp): Variational inequality applied

0 : Max/min values Temperature: 274.54354757639544 / 222.60072541993733

1 0.1482E-05

2 0.1998E-10

2 0.1998E-10

ComputeChange: NS (ITER=1) (NRM,RELC): ( 3460.0068 2.0000000 ) :: homologous temperature equation

0 : Number of constrained points: 6454

0 : Max/min values Temperature: 203191.91297230791 / -4609.9352275149840

1 0.3294E-06

2 0.6719E-12

2 0.6719E-12

ComputeChange: NS (ITER=2) (NRM,RELC): ( 273.36899 1.7071080 ) :: homologous temperature equation

0 : Number of constrained points: 6318

0 : Max/min values Temperature: 1437.5403838625793 / 141.81813128762255

1 0.6554E-07

2 0.3420E-12

2 0.3420E-12

ComputeChange: NS (ITER=3) (NRM,RELC): ( 678.45483 0.85117819 ) :: homologous temperature equation

0 : Number of constrained points: 7096

0 : Max/min values Temperature: 66017.518395604435 / -9313.7889683524772

1 0.1373E-06

2 0.3626E-07

3 0.3626E-07

4 0.3626E-07

5 0.3626E-07

6 0.3626E-07

7 0.3626E-07

8 0.1091E-41

ERROR:: IterSolve: Failed convergence tolerances.

by the way ,How I can obtain the same picture through the vtu file

any help is very thankful ,looking forward to you

yours sincerely liangfu