can elmerice compute ice velocity

Extension of Elmer in computational glaciology

can elmerice compute ice velocity

Postby lusaisai » 17 Nov 2015, 11:03

Hello,
I am a graduate student in Tongji University, China. These days I did some research in ice sheet modelling by the software Elmer/Ice. And I am interested in ice velocity modelling in Antarctic.
So I followed the example ”teterousse_2014_Step1--teterousse1.sif” by Prof. Gagliardini, then I got the ice velocity distribution map as below.
modelled velocity.jpg
modelled velocity
modelled velocity.jpg (87.16 KiB) Viewed 2297 times

However, there is measured velocity map by Prof. Rignot this region as below.
measured velocity.jpg
measured velocity from Prof. Rignot
measured velocity.jpg (88.21 KiB) Viewed 2297 times

Comparing to my result, there is large difference.I am confused about that. I wonder whether I made some mistakes in writing the sif file(if yes, can you give me some suggestions), or actually there will be different between modelled and measured ice velocity. Besides, I also want to know can the elmer/ice make the ice velocity map like the measured one.

I am not familiar with Elmer/Ice, so I am really sorry if I overlooked or misunderstood anything.

I will be very appreciated for any help!
Yours,
Saisai
Attachments
ice velocity.sif
the sif imitated Prof. Gagliardini's example sif
(6.16 KiB) Downloaded 124 times
lusaisai
 
Posts: 6
Joined: 14 Apr 2015, 19:53

Re: can elmerice compute ice velocity

Postby tzwinger » 17 Nov 2015, 11:28

Dear Saisai,
First of all, we have no clue what the units in the picture from Rignot are (cm/day, m/year?) we should compare your results to - if you used the attached SIF your Elmer/Ice velocities are m/year. Looking at your SIF you have a no-slip condition at the bedrock, which kind of contradicts the basic idea behind an ice stream - for having pure deformation you actually achieved quite high velocities, which is due to the high ice temperature of -1 C (making the ice very soft), which of course will not apply throughout an Antarctic ice stream. The second issue I can spot is the no-flow condition on the sidewalls (including the in- and outlet of your ice -stream). What you have to do is to find out the correct basal sliding parameters that reproduce your surface velocity pattern and get a good guess on your internal temperature (which controls the viscosity). Doing so, usually requests inversion of basal sliding from satellite data. Explaining this in a forum post is not possible - this is far from being trivial. I would recommend you studying the material from last advanced Elmer/Ice course which is to be found in the Elmer/Ice Wiki (courses). To re-emphasize: There is a vast difference between an Antarctic ice stream and a poly-thermal alpine glacier, so you cannot just take the unaltered solver input file of the latter to build a simulation for your problem.

Regards,

Thomas
tzwinger
Site Admin
 
Posts: 80
Joined: 24 Aug 2009, 12:20

Re: can elmerice compute ice velocity

Postby lusaisai » 17 Nov 2015, 13:55

Hi Thomas, thank you for your reply.

The units in the picture from Rignot are m/year, and I also replace the temperature in the sif according to data from the weather station.
Your answer is helpful for me , I think I should think about the basal sliding if I want to get the velocity map.

Yours Sincerely,
Saisai
lusaisai
 
Posts: 6
Joined: 14 Apr 2015, 19:53


Return to Elmer/Ice

Who is online

Users browsing this forum: No registered users and 1 guest