AIFlow Non-diagonal Fabric Variables

Extension of Elmer in computational glaciology

AIFlow Non-diagonal Fabric Variables

Postby kate.hruby » 09 Feb 2018, 23:36

Hello,

This question is regarding the a_12, a_23 and a_13 values (Fabric 3-5) in the AIFlow Solver. When needing to rotate, say, a single-maximum fabric not in an x, y, z plane into a single maximum in the x direction, does one input a single maximum fabric in the x direction, but with values in Fabrics 3-5 as well?

For example:
Fabric 1 = Real 0.998 !a2_11
Fabric 2 = Real 0.001 !a2_22
Fabric 3 = Real 0.66 !a2_12
Fabric 4 = Real 0.56 !a2_23
Fabric 5 = Real 0.49 !a2_13

Where the single maximum is hypothetically off the x-axis by 40˚, off the y-axis by 30˚ and off the z-axis by 50˚, thus making the fabric parameters
Fabric 3 = cos(40)*cos(30) = 0.66
Fabric 4 = cos(30)*cos(50) = 0.56
Fabric 5 = cos(40)*cos(50) = 0.49
according to the orientation tensor specified in Watson, 1965 and Woodcock, 1977. Is this a correct assumption for the use of the Fabric variables 3, 4 and 5?

Best,
Kate
kate.hruby
 
Posts: 1
Joined: 09 Feb 2018, 23:27

Return to Elmer/Ice

Who is online

Users browsing this forum: No registered users and 1 guest

cron