periodic BC and moving mesh

Numerical methods and mathematical models of Elmer
Post Reply
raback
Site Admin
Posts: 4812
Joined: 22 Aug 2009, 11:57
Antispam: Yes
Location: Espoo, Finland
Contact:

Re: periodic BC and moving mesh

Post by raback »

Hi Martina,

I see no reason why this could not work. Difficult to say where the problem lies without having access to the whole case.

One possibility: if your "mesh update 2" is periodic you don't fix the absolute value. You should have at least some fixed value at some boundary for each direction so the mesh does not start flying around.

-Peter
Post Reply