Good Evening dear community,
My problem is analyzing the flowing of a zinc film along a moving wall. Atop the zinc film, there is air. I am trying to include the adaptingmesh Solver in my case.sif and the FreeSurface solver; however I do not observe any mesh modifications near the velocity gradient while the fluid is moving. I attached my case.sif, my mesh and a gif of the phenomenon (zinc color is red).
Thanks in advance for your answers.
Regards,
Andrea
MULTIPHASE PROBLEM: ADAPTIVE MESHING WITH FREESURFACE
-
- Posts: 176
- Joined: 22 Mar 2021, 18:39
- Antispam: Yes
- Location: POLYTHECNIC UNIVERSITY OF TURIN
MULTIPHASE PROBLEM: ADAPTIVE MESHING WITH FREESURFACE
- Attachments
-
- results_2.gif (1002.61 KiB) Viewed 832 times
-
- rettangolo_0.1_x_0.15_raffianto_con_triangoli_grezzo.msh
- (1.69 KiB) Downloaded 122 times
-
- case.sif
- (5.11 KiB) Downloaded 126 times
POLYTECHNIC UNIVERSITY OF TURIN-DIMEAS
-
- Posts: 176
- Joined: 22 Mar 2021, 18:39
- Antispam: Yes
- Location: POLYTHECNIC UNIVERSITY OF TURIN
Re: MULTIPHASE PROBLEM: ADAPTIVE MESHING WITH FREESURFACE
I used the excellent work posted by NJank in the post viewtopic.php?f=18&t=2193&p=20222&hilit ... esh#p20222
POLYTECHNIC UNIVERSITY OF TURIN-DIMEAS