Tutorial 4 Loaded Elastic Curve
-
- Posts: 15
- Joined: 17 Feb 2019, 04:15
- Antispam: Yes
Tutorial 4 Loaded Elastic Curve
I'm attempting to following instructions for Tutorial 4-Loaded Elastic Curve from the following pdf, http://www.nic.funet.fi/index/elmer/doc ... orials.pdf. Instructions involve nonlinear elasticity tabs in the equation and boundary condition sections. When I attempt these I find tabs for Electrostatics, Heat Equation,.....up to Result Output when scrolling to the right. But I cannot seem to locate the nonlinear elasticity tabs depicted in the Elmer tutorial. There is a nonlinear system tab within the Edit Solver Settings but not within the equation and boundary condition windows. Any thoughts?
Re: Tutorial 4 Loaded Elastic Curve
Hi,
go into your Elmer installation directory to share/ElmerGUI. There are directories edf and edf-extra. edf-extra contains xml files for additional solvers. Move those you need to edf, and it should work.
HTH,
Matthias
go into your Elmer installation directory to share/ElmerGUI. There are directories edf and edf-extra. edf-extra contains xml files for additional solvers. Move those you need to edf, and it should work.
HTH,
Matthias
-
- Posts: 15
- Joined: 17 Feb 2019, 04:15
- Antispam: Yes
Re: Tutorial 4 Loaded Elastic Curve
Perfect, thank you!