![Surprised :o](./images/smilies/icon_e_surprised.gif)
I'd be interested to hear from anyone else for whom these tests either pass or fail, and also if there any other tests that fail for you but pass for me. We really need to have a robust set of tests for the sake of testing our changes before committing to the repository.
My laptop is running Linux Mint VMware under a Windows 10 host. I am using gnu compliers. I can give more details if you like.
There are 438 tests altogether. Here is the ctest output listing the failed tests on my laptop:
The following tests FAILED:
20 - ThicknessSolver (Failed)
28 - Damage (Failed)
80 - PhaseChangeB (Failed)
251 - freesurf_maxd (Failed)
252 - freesurf_maxd_np2 (Failed)
253 - freesurf_maxd_np4 (Failed)
274 - CoilSolverTwoLoops (Failed)
275 - CoilSolverTwoLoops_np2 (Failed)
276 - CoilSolverTwoLoops_np4 (Failed)
381 - structmap5 (Failed)
Errors while running CTest
I had a closer look at the elmerice failures. This is how the thickness solver fails on my laptop:
…
FlowSolve: -------------------------------------
FlowSolve: NAVIER-STOKES ITERATION 11
FlowSolve: -------------------------------------
FlowSolve:
FlowSolve: Starting Assembly...
FlowSolve: Assembly done
FlowSolve: Dirichlet conditions done
ComputeChange: NS (ITER=11) (NRM,RELC): ( 9.3953629 0.17507641E-12 ) :: navier-stokes
FlowSolve: iter: 11 Assembly: (s) 1.73 18.57
FlowSolve: iter: 11 Solve: (s) 0.92 10.83
FlowSolve: Result Norm : 9.3953629195726087
FlowSolve: Relative Change : 1.7507641241383808E-013
StructuredProjectToPlane: ------------------------------------------
StructuredProjectToPlane: Performing projection on a structured mesh
StructuredProjectToPlane: ------------------------------------------
DetectExtrudedStructure: Top and bottom pointer init time: 1.9800000000103068E-004
DetectExtrudedStructure: Top and bottom pointer init rounds: 5
DetectExtrudedStructure: Number of nodes at the top: 121
DetectExtrudedStructure: Number of nodes at the bottom: 121
StructuredProjectToPlane: Projection time: 1.7899999999926308E-004
StructuredProjectToPlane: ------------------------------------------
ThicknessSolver (h): Memory allocations done
ThicknessSolver (h): Non-linear Iteration 1 out of max. 50
1500 NaN
1501 NaN
ERROR:: IterSolve: Failed convergence tolerances.
ERROR:: ComputeChange: Norm of solution appears to be NaN
This is certainly a failure. Does this test fail for anyone else? Does this test pass for anyone else? Who "owns" the test? Does it work for you with a standard recent checkout of the elmerice branch? I ran this test on Taito and it also failed, though I have not looked closely at the output.
The other elmerice test that fails is the Damage test. Here is the last bit of output from my laptop:
...
SaveScalars: All done
SaveScalars: -----------------------------------------
WARNING:: CompareToReferenceSolution: Solver 7 FAILED: Norm = 8.14727269E-02 RefNorm = 8.14660480E-02
CompareToReferenceSolution: Relative Error to reference norm: 8.198387E-05
WARNING:: CompareToReferenceSolution: FAILED 1 tests out of 1!
ElmerSolver: *** Elmer Solver: ALL DONE ***
ElmerSolver: The end
SOLVER TOTAL TIME(CPU,REAL): 217.46 225.42
ELMER SOLVER FINISHED AT: 2016/02/18 23:31:45
This looks like a successful simulation, with perhaps a tolerance that is too strict? The test passed on Taito. Who "owns" this test? Do you think we should increase the tolerance?
Regards,
Rupert