Hello Colleagues,
New user here. I'm attempting to install Elmer in Ubuntu 14.04. When I followed the instructions to install via the launchpad, I've got segmentation error on my attempt to run the vortex shedding example, also some packages are missing. So I've gone through the cmake road to get the elmer installation. I've got the copy of elmer from github and proceeded to follow the instructions. I've looked through the multitude of forums and directions how to make the correct installation and in the end there were mostly the developer warnings in the configuration message port (I don't think I need to worry about them, please correct me if I'm wrong), after generation and running the "make install" command I've performed the ctest and got only 13% of tests passed, out of 306 tests 265 have failed. I'm at a loss and not sure how to solve this problem, I thought that I'd be able to figure out whats wrong but I'm hitting the wall here, and requesting help from the community. I'm going to post the process of installation in my following post.
Best, Elanid.
Cmake based Elmer distributions
Re: Cmake based Elmer distributions
Last edited by Elanid on 15 Apr 2015, 23:25, edited 1 time in total.
-
- Site Admin
- Posts: 4838
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Cmake based Elmer distributions
Hi Elanid
Here are maybe the most complete instructions
http://www.elmerfem.org/elmerwiki/index ... sing_Cmake
-Peter
Here are maybe the most complete instructions
http://www.elmerfem.org/elmerwiki/index ... sing_Cmake
-Peter
Re: Cmake based Elmer distributions
Hello,
Elan here, As per my previous post the following is the process I went through to install elmer version 7 in ubuntu 14.04 (keep in mind I've recently started with ubuntu, so I'm not entirely competent in the linux area yet):
1. Made directories for elmer in home folder and made the build and install folders inside.
2. Terminal: cd elmer
3. Terminal: git clone https://www.github.com/ElmerCSC/elmerfem
4. Termnial: cd build
5. Terminal: cmake-gui
6. Cmake, version 2.8.12, gui portal, after first configuration using the default native compilers :
Configuration Output:
7. Next Configuration:
8. Configuration 3:
9. Qt version is above 4, the directories for OCE and VTK were assigned, and qwt was found.
10. Last configuration:
11. Pressed generate (Generating Done), exited the gui.
12. Continuing on in the same terminal: make
13. Terminal: sudo make install
14. Terminal: ctest
Well, this is the complete process I've followed. It's odd I've looked at some forums stating that the errors in the 95% range are not a big deal, but I haven't seen anyone have this problem on the forum.
I've used the elmer version 6.1 before a little bit and made a working vortex shedding example, so I thought to open the ElmerGUI and see if there are other things that may point me to the solution. In the solver log, I got the following:
And that is why I'm in need of help, I thought I was following the correct way for installing elmer 7 in ubuntu 14.04 but it turns out that there is something wrong. Despite my best efforts to solve this problem I do not know what to do any longer and that's why I would really appreciate any help on this matter. Sorry for the long post, and thank you for consideration.
Best regards, Elan.
P.s. Thank you for quick reply Peter, I've gone along with this process and it appears that this matter persist.
P.s.s. I think it's also worth mentioning that when I use the installation from launchpad and use the vortex shedding example the same error occurs. Would it mean that there is something that I'm missing?
Elan here, As per my previous post the following is the process I went through to install elmer version 7 in ubuntu 14.04 (keep in mind I've recently started with ubuntu, so I'm not entirely competent in the linux area yet):
1. Made directories for elmer in home folder and made the build and install folders inside.
2. Terminal: cd elmer
3. Terminal: git clone https://www.github.com/ElmerCSC/elmerfem
4. Termnial: cd build
5. Terminal: cmake-gui
6. Cmake, version 2.8.12, gui portal, after first configuration using the default native compilers :
Code: Select all
-DCMAKE_BUILD_TYPE=RelWithDebInfo \
-DCMAKE_Fortran_MODULE_DIRECTORY=/home/elanid/elmer/build/fmodules \
-DCMAKE_INSTALL_PREFIX=/home/elanid/elmer/install \
-DELEMER_SOLVER_HOME=/home/elanid/elmer/install/share/elmersolver \
-DCMAKE_C_COMPILER=/usr/bin/gcc \
-DCMAKE_Fortran_COMPILER=/usr/bin/gfortran \
-DWITH_ELMERGUI:BOOL=TRUE \
-DWITH_ELMERGUILOGGER:BOOL=TRUE \
-DWITH_ELMERGUITESTER:BOOL=TRUE \
-DWITH_MPI:BOOL=TRUE \
-DWITH_Mumps:BOOL=TRUE \
-DWITH_Hypre:BOOL=TRUE \
-DWITH_TRILINOS:BOOL=FALSE \ (Attempted using trilinos but due to errors did not proceed)
Code: Select all
The Fortran compiler identification is GNU
The C compiler identification is GNU 4.8.2
The CXX compiler identification is GNU 4.8.2
Check for working Fortran compiler: /usr/bin/f95
Check for working Fortran compiler: /usr/bin/f95 -- works
Detecting Fortran compiler ABI info
Detecting Fortran compiler ABI info - done
Checking whether /usr/bin/f95 supports Fortran 90
Checking whether /usr/bin/f95 supports Fortran 90 -- yes
Check for working C compiler: /usr/bin/cc
Check for working C compiler: /usr/bin/cc -- works
Detecting C compiler ABI info
Detecting C compiler ABI info - done
Check for working CXX compiler: /usr/bin/c++
Check for working CXX compiler: /usr/bin/c++ -- works
Detecting CXX compiler ABI info
Detecting CXX compiler ABI info - done
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:9
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:66
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
Checking whether GFortran version >= 4.8 -- yes
Found MPI_C: /usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
Found MPI_CXX: /usr/lib/libmpi_cxx.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
Found MPI_Fortran: /usr/lib/libmpi_f90.so;/usr/lib/libmpi_f77.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
Looking for Fortran sgemm
Looking for Fortran sgemm - found
Looking for include file pthread.h
Looking for include file pthread.h - found
Looking for pthread_create
Looking for pthread_create - not found
Looking for pthread_create in pthreads
Looking for pthread_create in pthreads - not found
Looking for pthread_create in pthread
Looking for pthread_create in pthread - found
Found Threads: TRUE
A library with BLAS API found.
A library with BLAS API found.
Looking for Fortran cheev
Looking for Fortran cheev - found
A library with LAPACK API found.
Checking whether /usr/bin/f95 supports PROCEDURE POINTER
Checking whether /usr/bin/f95 supports PROCEDURE POINTER -- yes
Checking whether /usr/bin/f95 supports CONTIGUOUS
Checking whether /usr/bin/f95 supports CONTIGUOUS -- yes
Checking whether /usr/bin/f95 supports EXECUTE_COMMAND_LINE
Checking whether /usr/bin/f95 supports EXECUTE_COMMAND_LINE -- yes
Looking for include file inttypes.h
Looking for include file inttypes.h - found
Looking for sys/types.h
Looking for sys/types.h - found
Looking for stdint.h
Looking for stdint.h - found
Looking for stddef.h
Looking for stddef.h - found
Check size of long
Check size of long - done
------------------------------------------------
BLAS library: /usr/lib/libblas.so
LAPACK library: /usr/lib/liblapack.so;/usr/lib/libblas.so
------------------------------------------------
Fortran compiler: /usr/bin/f95
Fortran flags:
------------------------------------------------
C compiler: /usr/bin/cc
C flags:
------------------------------------------------
CXX compiler: /usr/bin/c++
CXX flags:
------------------------------------------------
MPI Fortran: TRUE
MPI Fortran compiler: /usr/bin/mpif90
MPI Fortran flags:
MPI Fortran include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/lib
MPI Fortran libraries: /usr/lib/libmpi_f90.so;/usr/lib/libmpi_f77.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI Fortran link flags:
------------------------------------------------
MPI C: TRUE
MPI C compiler: /usr/bin/mpicc
MPI C flags:
MPI C include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/include/openmpi
MPI C libraries: /usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI C flags:
------------------------------------------------
------------------------------------------------
Package filename: elmerfem-7.0-24ae551-20150415_Linux-i686
Patch version: 7.0-24ae551
Configuring done
Code: Select all
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:9
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:66
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
Checking whether GFortran version >= 4.8 -- yes
A library with BLAS API found.
A library with BLAS API found.
A library with LAPACK API found.
Finding Mumps
Finding SCALAPACK
Checking if BLACS library is needed by SCALAPACK
Looking for Fortran blacs_gridinit
Looking for Fortran blacs_gridinit - not found
Checking if BLACS library is needed by SCALAPACK -- yes
Finding BLACS
A library with BLACS API found.
BLACS libraries: /usr/lib/libblacs-pvm.so
Checking if Metis library is needed by Mumps
Checking if Metis library is needed by Mumps -- yes
Finding Metis
Checking if ParMetis library is needed by Mumps
Checking if ParMetis library is needed by Mumps -- yes
Finding ParMetis
A library with Mumps API found.
Mumps include dir: /usr/include
Mumps libraries: /usr/lib/libdmumps.so;/usr/lib/libmumps_common.so;/usr/lib/libpord.so;/usr/lib/libscalapack-openmpi.so;/usr/lib/libblacs-pvm.so;/usr/lib/libmetis.so;/usr/lib/libparmetis.so
Checking whether /usr/bin/f95 supports PROCEDURE POINTER
Checking whether /usr/bin/f95 supports PROCEDURE POINTER -- yes
Checking whether /usr/bin/f95 supports CONTIGUOUS
Checking whether /usr/bin/f95 supports CONTIGUOUS -- yes
Checking whether /usr/bin/f95 supports EXECUTE_COMMAND_LINE
Checking whether /usr/bin/f95 supports EXECUTE_COMMAND_LINE -- yes
Building ElmerGUI
------------------------------------------------
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUI/CMakeLists.txt:16 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Looking for Q_WS_X11
Looking for Q_WS_X11 - found
Looking for Q_WS_WIN
Looking for Q_WS_WIN - not found
Looking for Q_WS_QWS
Looking for Q_WS_QWS - not found
Looking for Q_WS_MAC
Looking for Q_WS_MAC - not found
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
[ElmerGUI] Qt4: TRUE
[ElmerGUI] Qt4_LIBRARIES:
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUItester/CMakeLists.txt:3 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUIlogger/CMakeLists.txt:4 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
[ElmerGUIlogger] Qt4: TRUE
[ElmerGUIlogger] Qt4_LIBRARIES:
------------------------------------------------
CMake Warning at ElmerGUIlogger/CMakeLists.txt:28 (MESSAGE):
QT_USE_FILE: /usr/share/cmake-2.8/Modules/UseQt4.cmake
------------------------------------------------
BLAS library: /usr/lib/libblas.so
LAPACK library: /usr/lib/liblapack.so;/usr/lib/libblas.so
------------------------------------------------
Fortran compiler: /usr/bin/f95
Fortran flags:
------------------------------------------------
C compiler: /usr/bin/cc
C flags:
------------------------------------------------
CXX compiler: /usr/bin/c++
CXX flags:
------------------------------------------------
MPI Fortran: TRUE
MPI Fortran compiler: /usr/bin/mpif90
MPI Fortran flags:
MPI Fortran include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/lib
MPI Fortran libraries: /usr/lib/libmpi_f90.so;/usr/lib/libmpi_f77.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI Fortran link flags:
------------------------------------------------
MPI C: TRUE
MPI C compiler: /usr/bin/mpicc
MPI C flags:
MPI C include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/include/openmpi
MPI C libraries: /usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI C flags:
------------------------------------------------
Mumps: TRUE
Mumps include: /usr/include
Mumps libraries: /usr/lib/libdmumps.so;/usr/lib/libmumps_common.so;/usr/lib/libpord.so;/usr/lib/libscalapack-openmpi.so;/usr/lib/libblacs-pvm.so;/usr/lib/libmetis.so;/usr/lib/libparmetis.so
------------------------------------------------
Hypre: TRUE
Hypre include: /usr/include
Hypre libraries: /usr/lib/libHYPRE.so;/usr/lib/libHYPRE_Euclid.so;/usr/lib/libHYPRE_parcsr_ls.so;/usr/lib/libHYPRE_ParaSails.so;/usr/lib/libHYPRE_IJ_mv.so
------------------------------------------------
Building ElmerGUI tester
------------------------------------------------
Building ElmerGUI logger
------------------------------------------------
------------------------------------------------
Package filename: elmerfem-7.0-24ae551-20150415_Linux-i686
Patch version: 7.0-24ae551
Configuring done
You have changed variables that require your cache to be deleted.
Configure will be re-run and you may have to reset some variables.
The following variables have changed:
CMAKE_Fortran_COMPILER= /usr/bin/gfortran
CMAKE_C_COMPILER= /usr/bin/gcc
The Fortran compiler identification is GNU
The C compiler identification is GNU 4.8.2
The CXX compiler identification is GNU 4.8.2
Check for working Fortran compiler: /usr/bin/gfortran
Check for working Fortran compiler: /usr/bin/gfortran -- works
Detecting Fortran compiler ABI info
Detecting Fortran compiler ABI info - done
Checking whether /usr/bin/gfortran supports Fortran 90
Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
Check for working C compiler: /usr/bin/gcc
Check for working C compiler: /usr/bin/gcc -- works
Detecting C compiler ABI info
Detecting C compiler ABI info - done
Check for working CXX compiler: /usr/bin/c++
Check for working CXX compiler: /usr/bin/c++ -- works
Detecting CXX compiler ABI info
Detecting CXX compiler ABI info - done
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:9
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:66
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
Checking whether GFortran version >= 4.8 -- yes
Found MPI_C: /usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
Found MPI_CXX: /usr/lib/libmpi_cxx.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
Found MPI_Fortran: /usr/lib/libmpi_f90.so;/usr/lib/libmpi_f77.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
Looking for Fortran sgemm
Looking for Fortran sgemm - found
Looking for include file pthread.h
Looking for include file pthread.h - found
Looking for pthread_create
Looking for pthread_create - not found
Looking for pthread_create in pthreads
Looking for pthread_create in pthreads - not found
Looking for pthread_create in pthread
Looking for pthread_create in pthread - found
Found Threads: TRUE
A library with BLAS API found.
A library with BLAS API found.
Looking for Fortran cheev
Looking for Fortran cheev - found
A library with LAPACK API found.
Checking whether /usr/bin/gfortran supports PROCEDURE POINTER
Checking whether /usr/bin/gfortran supports PROCEDURE POINTER -- yes
Checking whether /usr/bin/gfortran supports CONTIGUOUS
Checking whether /usr/bin/gfortran supports CONTIGUOUS -- yes
Checking whether /usr/bin/gfortran supports EXECUTE_COMMAND_LINE
Checking whether /usr/bin/gfortran supports EXECUTE_COMMAND_LINE -- yes
Looking for include file inttypes.h
Looking for include file inttypes.h - found
Looking for sys/types.h
Looking for sys/types.h - found
Looking for stdint.h
Looking for stdint.h - found
Looking for stddef.h
Looking for stddef.h - found
Check size of long
Check size of long - done
------------------------------------------------
BLAS library: /usr/lib/libblas.so
LAPACK library: /usr/lib/liblapack.so;/usr/lib/libblas.so
------------------------------------------------
Fortran compiler: /usr/bin/gfortran
Fortran flags:
------------------------------------------------
C compiler: /usr/bin/gcc
C flags:
------------------------------------------------
CXX compiler: /usr/bin/c++
CXX flags:
------------------------------------------------
MPI Fortran: TRUE
MPI Fortran compiler: /usr/bin/mpif90
MPI Fortran flags:
MPI Fortran include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/lib
MPI Fortran libraries: /usr/lib/libmpi_f90.so;/usr/lib/libmpi_f77.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI Fortran link flags:
------------------------------------------------
MPI C: TRUE
MPI C compiler: /usr/bin/mpicc
MPI C flags:
MPI C include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/include/openmpi
MPI C libraries: /usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI C flags:
------------------------------------------------
------------------------------------------------
Package filename: elmerfem-7.0-24ae551-20150415_Linux-i686
Patch version: 7.0-24ae551
Configuring done
Code: Select all
-DWITH_OCC:BOOL=TRUE \
-DWITH_PARAVIEW:BOOL=TRUE \
-DWITH_QWT:BOOL=TRUE \
-DWITH_VTK:BOOL=TRUE \
-DWITH_PYTHONQT:BOOL=FALSE \
-DWITH_MATC:BOOL=TRUE
Code: Select all
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:9
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:66
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
Checking whether GFortran version >= 4.8 -- yes
A library with BLAS API found.
A library with BLAS API found.
A library with LAPACK API found.
Finding Mumps
Checking if Metis library is needed by Mumps
Checking if Metis library is needed by Mumps -- yes
Checking if ParMetis library is needed by Mumps
Checking if ParMetis library is needed by Mumps -- yes
A library with Mumps API found.
Mumps include dir: /usr/include
Mumps libraries: /usr/lib/libdmumps.so;/usr/lib/libmumps_common.so;/usr/lib/libpord.so;/usr/lib/libscalapack-openmpi.so;/usr/lib/libmetis.so;/usr/lib/libparmetis.so
Checking whether /usr/bin/gfortran supports PROCEDURE POINTER
Checking whether /usr/bin/gfortran supports PROCEDURE POINTER -- yes
Checking whether /usr/bin/gfortran supports CONTIGUOUS
Checking whether /usr/bin/gfortran supports CONTIGUOUS -- yes
Checking whether /usr/bin/gfortran supports EXECUTE_COMMAND_LINE
Checking whether /usr/bin/gfortran supports EXECUTE_COMMAND_LINE -- yes
Building ElmerGUI
------------------------------------------------
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUI/CMakeLists.txt:16 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
[ElmerGUI] Qt4: TRUE
[ElmerGUI] Qt4_LIBRARIES:
------------------------------------------------
Looking for XOpenDisplay in /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so
Looking for XOpenDisplay in /usr/lib/i386-linux-gnu/libX11.so;/usr/lib/i386-linux-gnu/libXext.so - found
Looking for gethostbyname
Looking for gethostbyname - found
Looking for connect
Looking for connect - found
Looking for remove
Looking for remove - found
Looking for shmat
Looking for shmat - found
Looking for IceConnectionNumber in ICE
Looking for IceConnectionNumber in ICE - found
Found X11: /usr/lib/i386-linux-gnu/libX11.so
Found OpenGL: /usr/lib/i386-linux-gnu/libGL.so
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
/usr/share/cmake-2.8/Modules/FindQt.cmake:155 (include)
ElmerGUI/cmake/Modules/FindQwt.cmake:11 (INCLUDE)
ElmerGUI/CMakeLists.txt:31 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
[ElmerGUI] Qwt: TRUE
[ElmerGUI] QWT_LIBRARY: /usr/lib/libqwt.so
[ElmerGUI] QWT_INCLUDE_DIR: /usr/include/qwt
------------------------------------------------
[ElmerGUI] OCE: 1
[ElmerGUI] OCE_VERSION: 0.15
[ElmerGUI] OCE_INCLUDE_DIRS: /usr/lib/i386-linux-gnu/oce-0.15/../../../include/oce
[ElmerGUI] ELMER_OCC_LIBS: TKernel;TKMath;TKG3d;TKG2d;TKBRep;TKSTEP;TKMesh;TKIGES;TKG2d;TKGeomBase;TKBool;TKBO;TKGeomAlgo;TKPrim;TKShHealing;TKSTEP209;TKSTEPAttr;TKSTEPBase;TKTopAlgo;TKXSBase
------------------------------------------------
[ElmerGUI] VTK version: 6.0.0
[ElmerGUI] VTK_LIBS: vtkCommonColor;vtkCommonDataModel;vtkCommonMath;vtkCommonCore;vtksys;vtkCommonMisc;vtkCommonSystem;vtkCommonTransforms;vtkIOXML;vtkIOGeometry;vtkIOCore;vtkCommonExecutionModel;/usr/lib/i386-linux-gnu/libz.so;vtkIOXMLParser;/usr/lib/i386-linux-gnu/libexpat.so;vtkInteractionImage;vtkImagingColor;vtkImagingCore;vtkInteractionStyle;vtkRenderingCore;vtkFiltersExtraction;vtkFiltersCore;vtkFiltersGeneral;vtkCommonComputationalGeometry;vtkFiltersStatistics;vtkImagingFourier;vtkalglib;vtkFiltersGeometry;vtkFiltersSources;vtkIOImage;vtkDICOMParser;vtkmetaio;/usr/lib/i386-linux-gnu/libjpeg.so;/usr/lib/i386-linux-gnu/libpng.so;/usr/lib/i386-linux-gnu/libtiff.so;vtkInteractionWidgets;vtkFiltersHybrid;vtkImagingSources;vtkFiltersModeling;vtkImagingGeneral;vtkImagingHybrid;vtkRenderingAnnotation;vtkRenderingFreeType;/usr/lib/i386-linux-gnu/libfreetype.so;vtkftgl;vtkRenderingVolume;vtkFiltersAMR;vtkParallelCore;vtkIOLegacy;vtkIOAMR;/usr/lib/i386-linux-gnu/libhdf5.so;/usr/lib/i386-linux-gnu/libpthread.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libm.so;/usr/lib/i386-linux-gnu/libhdf5_hl.so;vtkIOEnSight;vtkproj4;vtkFiltersParallel;vtkIOXdmf2;vtkxdmf2;/usr/lib/i386-linux-gnu/libxml2.so;vtkWrappingPythonCore;/usr/lib/i386-linux-gnu/libpython2.7.so;vtkWrappingTools;vtkIOInfovis;vtkInfovisCore;vtkFiltersParallelImaging;vtkFiltersImaging;vtkIOExodus;vtkexoIIc;vtkNetCDF;vtkNetCDF_cxx;/usr/lib/i386-linux-gnu/libogg.so;/usr/lib/i386-linux-gnu/libtheoraenc.so;/usr/lib/i386-linux-gnu/libtheoradec.so;vtkFiltersFlowPaths;vtkRenderingLOD;vtkRenderingHybridOpenGL;vtkRenderingOpenGL;vtkIOParallelLSDyna;vtkIOLSDyna;vtkFiltersParallelGeometry;vtkParallelMPI;vtkRenderingFreeTypeOpenGL;vtkGUISupportQtOpenGL;vtkGUISupportQt;vtkFiltersParallelMPI;vtkTestingRendering;vtkIOMPIImage;vtkPythonInterpreter;vtksqlite;vtkInfovisBoostGraphAlgorithms;/usr/lib/libgl2ps.so;vtkIOPLY;VPIC;vtkRenderingVolumeOpenGL;vtkTestingGenericBridge;vtkChartsCore;vtkRenderingContext2D;vtkWrappingJava;vtkFiltersHyperTree;vtkIONetCDF;vtkIOSQL;vtkFiltersReebGraph;vtkIOODBC;vtkViewsQt;vtkViewsInfovis;vtkInfovisLayout;vtkRenderingLabel;vtkViewsCore;vtkGeovisCore;vtkFiltersSelection;vtkIOParallelExodus;vtkRenderingImage;vtkIOGDAL;vtkImagingStencil;vtkRenderingFreeTypeFontConfig;vtkGUISupportQtWebkit;vtkFiltersTexture;vtkIOMySQL;vtkjsoncpp;vtkRenderingGL2PS;vtkLocalExample;vtkViewsContext2D;vtkIOMovie;vtkFiltersParallelStatistics;vtkIOPostgreSQL;vtkFiltersParallelFlowPaths;vtkImagingMath;vtkDomainsChemistry;vtkGUISupportQtSQL;vtkViewsGeovis;vtkIOFFMPEG;vtkIOMPIParallel;vtkIOImport;vtkFiltersCosmo;Cosmo;vtkIOParallel;vtkIOVPIC;vtkFiltersProgrammable;vtkRenderingMatplotlib;vtkRenderingVolumeAMR;vtkTestingIOSQL;vtkIOParallelNetCDF;vtkIOVideo;vtkImagingStatistics;vtkImagingMorphological;vtkFiltersGeneric;verdict;vtkFiltersVerdict;vtkRenderingParallel;vtkIOMINC;vtkIOExport;vtkRenderingQt
[ElmerGUI] VTK_INCLUDE_DIRS: /usr/include/vtk-6.0;/usr/include;/usr/include/i386-linux-gnu;/usr/include/freetype2;/usr/include/libxml2;/usr/include/python2.7;/usr/lib/openmpi/include;/usr/lib/openmpi/include/openmpi;/usr/include/tcl8.6
------------------------------------------------
[ElmerGUI] Compiling in matc
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUItester/CMakeLists.txt:3 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUIlogger/CMakeLists.txt:4 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
[ElmerGUIlogger] Qt4: TRUE
[ElmerGUIlogger] Qt4_LIBRARIES:
------------------------------------------------
CMake Warning at ElmerGUIlogger/CMakeLists.txt:28 (MESSAGE):
QT_USE_FILE: /usr/share/cmake-2.8/Modules/UseQt4.cmake
------------------------------------------------
BLAS library: /usr/lib/libblas.so
LAPACK library: /usr/lib/liblapack.so;/usr/lib/libblas.so
------------------------------------------------
Fortran compiler: /usr/bin/gfortran
Fortran flags:
------------------------------------------------
C compiler: /usr/bin/gcc
C flags:
------------------------------------------------
CXX compiler: /usr/bin/c++
CXX flags:
------------------------------------------------
MPI Fortran: TRUE
MPI Fortran compiler: /usr/bin/mpif90
MPI Fortran flags:
MPI Fortran include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/lib
MPI Fortran libraries: /usr/lib/libmpi_f90.so;/usr/lib/libmpi_f77.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI Fortran link flags:
------------------------------------------------
MPI C: TRUE
MPI C compiler: /usr/bin/mpicc
MPI C flags:
MPI C include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/include/openmpi
MPI C libraries: /usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI C flags:
------------------------------------------------
Mumps: TRUE
Mumps include: /usr/include
Mumps libraries: /usr/lib/libdmumps.so;/usr/lib/libmumps_common.so;/usr/lib/libpord.so;/usr/lib/libscalapack-openmpi.so;/usr/lib/libmetis.so;/usr/lib/libparmetis.so
------------------------------------------------
Hypre: TRUE
Hypre include: /usr/include
Hypre libraries: /usr/lib/libHYPRE.so;/usr/lib/libHYPRE_Euclid.so;/usr/lib/libHYPRE_parcsr_ls.so;/usr/lib/libHYPRE_ParaSails.so;/usr/lib/libHYPRE_IJ_mv.so
------------------------------------------------
Building ElmerGUI tester
------------------------------------------------
Building ElmerGUI logger
------------------------------------------------
------------------------------------------------
Package filename: elmerfem-7.0-24ae551-20150415_Linux-i686
Patch version: 7.0-24ae551
Configuring done
10. Last configuration:
Code: Select all
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:9
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
CMake Warning (dev) at CMakeLists.txt:73 (INCLUDE):
Syntax Warning in cmake code at
/home/elanid/elmer/elmerfem/cmake/Modules/testGFortranVersion.cmake:49:66
Argument not separated from preceding token by whitespace.
This warning is for project developers. Use -Wno-dev to suppress it.
Checking whether GFortran version >= 4.8 -- yes
A library with BLAS API found.
A library with BLAS API found.
A library with LAPACK API found.
Finding Mumps
Checking if Metis library is needed by Mumps
Checking if Metis library is needed by Mumps -- yes
Checking if ParMetis library is needed by Mumps
Checking if ParMetis library is needed by Mumps -- yes
A library with Mumps API found.
Mumps include dir: /usr/include
Mumps libraries: /usr/lib/libdmumps.so;/usr/lib/libmumps_common.so;/usr/lib/libpord.so;/usr/lib/libscalapack-openmpi.so;/usr/lib/libmetis.so;/usr/lib/libparmetis.so
Checking whether /usr/bin/gfortran supports PROCEDURE POINTER
Checking whether /usr/bin/gfortran supports PROCEDURE POINTER -- yes
Checking whether /usr/bin/gfortran supports CONTIGUOUS
Checking whether /usr/bin/gfortran supports CONTIGUOUS -- yes
Checking whether /usr/bin/gfortran supports EXECUTE_COMMAND_LINE
Checking whether /usr/bin/gfortran supports EXECUTE_COMMAND_LINE -- yes
Building ElmerGUI
------------------------------------------------
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUI/CMakeLists.txt:16 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
[ElmerGUI] Qt4: TRUE
[ElmerGUI] Qt4_LIBRARIES:
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
/usr/share/cmake-2.8/Modules/FindQt.cmake:155 (include)
ElmerGUI/cmake/Modules/FindQwt.cmake:11 (INCLUDE)
ElmerGUI/CMakeLists.txt:31 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
[ElmerGUI] Qwt: ON
[ElmerGUI] QWT_LIBRARY: /usr/lib/libqwt.so
[ElmerGUI] QWT_INCLUDE_DIR: /usr/include/qwt
------------------------------------------------
[ElmerGUI] OCE: 1
[ElmerGUI] OCE_VERSION: 0.15
[ElmerGUI] OCE_INCLUDE_DIRS: /usr/lib/i386-linux-gnu/oce-0.15/../../../include/oce
[ElmerGUI] ELMER_OCC_LIBS: TKernel;TKMath;TKG3d;TKG2d;TKBRep;TKSTEP;TKMesh;TKIGES;TKG2d;TKGeomBase;TKBool;TKBO;TKGeomAlgo;TKPrim;TKShHealing;TKSTEP209;TKSTEPAttr;TKSTEPBase;TKTopAlgo;TKXSBase
------------------------------------------------
[ElmerGUI] VTK version: 6.0.0
[ElmerGUI] VTK_LIBS: vtkCommonColor;vtkCommonDataModel;vtkCommonMath;vtkCommonCore;vtksys;vtkCommonMisc;vtkCommonSystem;vtkCommonTransforms;vtkIOXML;vtkIOGeometry;vtkIOCore;vtkCommonExecutionModel;/usr/lib/i386-linux-gnu/libz.so;vtkIOXMLParser;/usr/lib/i386-linux-gnu/libexpat.so;vtkInteractionImage;vtkImagingColor;vtkImagingCore;vtkInteractionStyle;vtkRenderingCore;vtkFiltersExtraction;vtkFiltersCore;vtkFiltersGeneral;vtkCommonComputationalGeometry;vtkFiltersStatistics;vtkImagingFourier;vtkalglib;vtkFiltersGeometry;vtkFiltersSources;vtkIOImage;vtkDICOMParser;vtkmetaio;/usr/lib/i386-linux-gnu/libjpeg.so;/usr/lib/i386-linux-gnu/libpng.so;/usr/lib/i386-linux-gnu/libtiff.so;vtkInteractionWidgets;vtkFiltersHybrid;vtkImagingSources;vtkFiltersModeling;vtkImagingGeneral;vtkImagingHybrid;vtkRenderingAnnotation;vtkRenderingFreeType;/usr/lib/i386-linux-gnu/libfreetype.so;vtkftgl;vtkRenderingVolume;vtkFiltersAMR;vtkParallelCore;vtkIOLegacy;vtkIOAMR;/usr/lib/i386-linux-gnu/libhdf5.so;/usr/lib/i386-linux-gnu/libpthread.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libm.so;/usr/lib/i386-linux-gnu/libhdf5_hl.so;vtkIOEnSight;vtkproj4;vtkFiltersParallel;vtkIOXdmf2;vtkxdmf2;/usr/lib/i386-linux-gnu/libxml2.so;vtkWrappingPythonCore;/usr/lib/i386-linux-gnu/libpython2.7.so;vtkWrappingTools;vtkIOInfovis;vtkInfovisCore;vtkFiltersParallelImaging;vtkFiltersImaging;vtkIOExodus;vtkexoIIc;vtkNetCDF;vtkNetCDF_cxx;/usr/lib/i386-linux-gnu/libogg.so;/usr/lib/i386-linux-gnu/libtheoraenc.so;/usr/lib/i386-linux-gnu/libtheoradec.so;vtkFiltersFlowPaths;vtkRenderingLOD;vtkRenderingHybridOpenGL;vtkRenderingOpenGL;vtkIOParallelLSDyna;vtkIOLSDyna;vtkFiltersParallelGeometry;vtkParallelMPI;vtkRenderingFreeTypeOpenGL;vtkGUISupportQtOpenGL;vtkGUISupportQt;vtkFiltersParallelMPI;vtkTestingRendering;vtkIOMPIImage;vtkPythonInterpreter;vtksqlite;vtkInfovisBoostGraphAlgorithms;/usr/lib/libgl2ps.so;vtkIOPLY;VPIC;vtkRenderingVolumeOpenGL;vtkTestingGenericBridge;vtkChartsCore;vtkRenderingContext2D;vtkWrappingJava;vtkFiltersHyperTree;vtkIONetCDF;vtkIOSQL;vtkFiltersReebGraph;vtkIOODBC;vtkViewsQt;vtkViewsInfovis;vtkInfovisLayout;vtkRenderingLabel;vtkViewsCore;vtkGeovisCore;vtkFiltersSelection;vtkIOParallelExodus;vtkRenderingImage;vtkIOGDAL;vtkImagingStencil;vtkRenderingFreeTypeFontConfig;vtkGUISupportQtWebkit;vtkFiltersTexture;vtkIOMySQL;vtkjsoncpp;vtkRenderingGL2PS;vtkLocalExample;vtkViewsContext2D;vtkIOMovie;vtkFiltersParallelStatistics;vtkIOPostgreSQL;vtkFiltersParallelFlowPaths;vtkImagingMath;vtkDomainsChemistry;vtkGUISupportQtSQL;vtkViewsGeovis;vtkIOFFMPEG;vtkIOMPIParallel;vtkIOImport;vtkFiltersCosmo;Cosmo;vtkIOParallel;vtkIOVPIC;vtkFiltersProgrammable;vtkRenderingMatplotlib;vtkRenderingVolumeAMR;vtkTestingIOSQL;vtkIOParallelNetCDF;vtkIOVideo;vtkImagingStatistics;vtkImagingMorphological;vtkFiltersGeneric;verdict;vtkFiltersVerdict;vtkRenderingParallel;vtkIOMINC;vtkIOExport;vtkRenderingQt
[ElmerGUI] VTK_INCLUDE_DIRS: /usr/include/vtk-6.0;/usr/include;/usr/include/i386-linux-gnu;/usr/include/freetype2;/usr/include/libxml2;/usr/include/python2.7;/usr/lib/openmpi/include;/usr/lib/openmpi/include/openmpi;/usr/include/tcl8.6
------------------------------------------------
[ElmerGUI] Compiling in matc
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUItester/CMakeLists.txt:3 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
------------------------------------------------
CMake Warning (dev) at /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake:38 (include):
File /usr/share/cmake-2.8/Modules/CheckCXXSymbolExists.cmake includes
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake (found via
CMAKE_MODULE_PATH) which shadows
/usr/share/cmake-2.8/Modules/CheckSymbolExists.cmake. This may cause
errors later on .
Policy CMP0017 is not set: Prefer files from the CMake module directory
when including from there. Run "cmake --help-policy CMP0017" for policy
details. Use the cmake_policy command to set the policy and suppress this
warning.
Call Stack (most recent call first):
/usr/share/cmake-2.8/Modules/FindQt4.cmake:392 (include)
ElmerGUIlogger/CMakeLists.txt:4 (FIND_PACKAGE)
This warning is for project developers. Use -Wno-dev to suppress it.
Found Qt4: /usr/bin/qmake-qt4 (found version "4.8.6")
[ElmerGUIlogger] Qt4: TRUE
[ElmerGUIlogger] Qt4_LIBRARIES:
------------------------------------------------
CMake Warning at ElmerGUIlogger/CMakeLists.txt:28 (MESSAGE):
QT_USE_FILE: /usr/share/cmake-2.8/Modules/UseQt4.cmake
------------------------------------------------
BLAS library: /usr/lib/libblas.so
LAPACK library: /usr/lib/liblapack.so;/usr/lib/libblas.so
------------------------------------------------
Fortran compiler: /usr/bin/gfortran
Fortran flags:
------------------------------------------------
C compiler: /usr/bin/gcc
C flags:
------------------------------------------------
CXX compiler: /usr/bin/c++
CXX flags:
------------------------------------------------
MPI Fortran: TRUE
MPI Fortran compiler: /usr/bin/mpif90
MPI Fortran flags:
MPI Fortran include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/lib
MPI Fortran libraries: /usr/lib/libmpi_f90.so;/usr/lib/libmpi_f77.so;/usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI Fortran link flags:
------------------------------------------------
MPI C: TRUE
MPI C compiler: /usr/bin/mpicc
MPI C flags:
MPI C include dir: /usr/lib/openmpi/include;/usr/lib/openmpi/include/openmpi
MPI C libraries: /usr/lib/libmpi.so;/usr/lib/i386-linux-gnu/libdl.so;/usr/lib/i386-linux-gnu/libhwloc.so
MPI C flags:
------------------------------------------------
Mumps: TRUE
Mumps include: /usr/include
Mumps libraries: /usr/lib/libdmumps.so;/usr/lib/libmumps_common.so;/usr/lib/libpord.so;/usr/lib/libscalapack-openmpi.so;/usr/lib/libmetis.so;/usr/lib/libparmetis.so
------------------------------------------------
Hypre: TRUE
Hypre include: /usr/include
Hypre libraries: /usr/lib/libHYPRE.so;/usr/lib/libHYPRE_Euclid.so;/usr/lib/libHYPRE_parcsr_ls.so;/usr/lib/libHYPRE_ParaSails.so;/usr/lib/libHYPRE_IJ_mv.so
------------------------------------------------
Building ElmerGUI tester
------------------------------------------------
Building ElmerGUI logger
------------------------------------------------
------------------------------------------------
Package filename: elmerfem-7.0-24ae551-20150415_Linux-i686
Patch version: 7.0-24ae551
Configuring done
12. Continuing on in the same terminal: make
13. Terminal: sudo make install
14. Terminal: ctest
Code: Select all
13% tests passed, 265 tests failed out of 306
Total Test time (real) = 127.56 sec
The following tests FAILED:
1 - periodic_homogenize (Failed)
2 - mgdyn_steady (Failed)
3 - bodydir (Failed)
4 - AdvReactDG (Failed)
5 - LubricationTunedForce (Failed)
6 - 1dtests (Failed)
7 - ExtrudedMesh5 (Failed)
10 - ElastElstatBeam (Failed)
11 - shell2 (Failed)
12 - Q1Q0 (Failed)
14 - heateq_bdf3 (Failed)
16 - ContactFrictionHeating (Failed)
17 - CoupledPoisson2c (Failed)
18 - PoissonBEM (Failed)
19 - bodydir2 (Failed)
21 - pointload (Failed)
22 - mgdyn_airgap (Failed)
23 - DisContBoundary (Failed)
24 - LimitDisplacement3 (Failed)
25 - elstat (Failed)
26 - adv_diff1 (Failed)
27 - BlockLinElast3 (Failed)
28 - adv_diff2 (Failed)
29 - heateq_newmark_global (Failed)
30 - pointload2 (Failed)
31 - Step_stokes_block (Failed)
33 - StokesPFEM (Failed)
34 - PhaseChange3 (Failed)
35 - ExtrudedMeshDG (Failed)
36 - NaturalConvectionRestart (Failed)
37 - adv_diff3 (Failed)
38 - freesurf_ltd (Failed)
39 - heateq_newmark (Failed)
40 - DataToField (Failed)
41 - mgdyn2D_em (Failed)
42 - reload (Failed)
43 - FixPotentialLevels (Failed)
44 - CoupledPoisson2b (Failed)
45 - RotatingFlow (Failed)
46 - CoupledPoisson4 (Failed)
47 - reynolds2 (Failed)
48 - freesurf_sloshing_2d (Failed)
50 - FlowResNoslip (Failed)
51 - RichardsDyke (Failed)
52 - ConstantBCTemperature (Failed)
53 - HarmonicNS (Failed)
55 - LimitDisplacement2 (Failed)
56 - mgdyn_lamstack_widefreq_harmonic (Failed)
57 - savescalars_flux (Failed)
58 - PoissonBoltzmann (Failed)
59 - InductionHeating3 (Failed)
60 - CapacitanceMatrix (Failed)
61 - EdgeElementInterpolation (Failed)
63 - LimitDisplacement (Failed)
64 - fluxsolver (Failed)
65 - NormalizeMaterial (Failed)
66 - CompressIdealGas (Failed)
67 - HelmholtzPlaneWavesAxis (Failed)
68 - MortarPoisson2D (Failed)
69 - periodic3 (Failed)
70 - fluxsolver2 (Failed)
71 - mgdyn_steady_periodic (Failed)
73 - heateq_steady_start (Failed)
74 - L2norm (Failed)
75 - fsi_beam (Failed)
76 - fsi_box (Failed)
77 - DisContBoundaryMortarJumpC (Failed)
78 - levelset2 (Failed)
79 - DirichletNeumannSlave (Failed)
80 - multimesh (Failed)
82 - ContactFriction (Failed)
83 - shell (Failed)
84 - RigidMeshMapper1 (Failed)
85 - CoupledPoisson5 (Failed)
86 - NaturalConvection2 (Failed)
87 - diffuser_sst (Failed)
89 - adaptivity5 (Failed)
90 - channel_v2f (Failed)
91 - HeatControl2 (Failed)
93 - current (Failed)
95 - DisContBoundaryMortarJump (Failed)
96 - PoissonDG (Failed)
98 - StrainCalculation01 (Failed)
100 - ThermalActuator (Failed)
101 - BlockLinElast2b (Failed)
102 - geomstiff (Failed)
103 - ParticleAdvectorZalesak (Failed)
104 - AdvReactDG_P (Failed)
105 - DisContBoundaryNodalJumpB (Failed)
106 - mgdyn_torus_harmonic (Failed)
107 - BDM3D (Failed)
108 - CoordinateScaling (Failed)
110 - HelmholtzFEM (Failed)
111 - freesurf (Failed)
112 - StressEigen (Failed)
113 - AdvDiffHandles2 (Failed)
114 - mgdyn_transient_loss (Failed)
115 - periodic_explicit (Failed)
116 - current_heat_control (Failed)
117 - ThermalBiMetal (Failed)
118 - ShallowWaterNS (Failed)
119 - heateq_bdf2 (Failed)
120 - ElastElstat1DBeam (Failed)
121 - CoupledPoisson8 (Failed)
122 - ExtrudedMesh2 (Failed)
123 - adv_diff4 (Failed)
126 - CoupledPoisson1 (Failed)
127 - reynolds1 (Failed)
128 - mgdyn_3phase (Failed)
129 - mhd (Failed)
130 - ElastPelem (Failed)
131 - DisContBoundaryNodalJump (Failed)
132 - HelmholtzStructure (Failed)
134 - RotatingBCPoisson3DGeneric (Failed)
135 - BoundaryFluxes (Failed)
136 - ElmerGridExtrudeMaterial (Failed)
137 - streamlines (Failed)
138 - levelset3b (Failed)
140 - heateq (Failed)
141 - levelset3 (Failed)
144 - RotatingBCPoisson2D (Failed)
145 - mgdyn_bh (Failed)
146 - fsi_beam_optimize (Failed)
147 - BlockPoisson1 (Failed)
148 - RaviartThomas2D (Failed)
149 - NormalizeBF (Failed)
150 - ElmerGridExtrudeOffset (Failed)
151 - NormalizeBC (Failed)
152 - HelmholtzEdge (Failed)
153 - heateq_spline_table (Failed)
154 - RotatingBCPoisson3DSymmSkev (Failed)
155 - NormalTangentialDisplacement2 (Failed)
156 - CoupledPoisson1b (Failed)
157 - ExtrudedMesh (Failed)
158 - ElasticLubrication (Failed)
159 - mgdyn_harmonic_loss (Failed)
160 - fsi_box2 (Failed)
161 - PoissonPFEM (Failed)
162 - DNS_WaveSimulation (Failed)
163 - StrainCalculation03 (Failed)
164 - RotatingBCPoisson3D (Failed)
165 - Electrokinetics (Failed)
167 - mgdyn_torus (Failed)
168 - CoupledPoisson7 (Failed)
171 - Step_v2f (Failed)
173 - structmap2 (Failed)
174 - marangoni (Failed)
175 - ParticleFalling (Failed)
176 - CurvedBndryPFEM2 (Failed)
177 - piezo (Failed)
178 - BlockPoisson3 (Failed)
179 - HeatControl (Failed)
180 - staged_sim (Failed)
181 - 2ndtime (Failed)
182 - IsolineGmsh (Failed)
183 - HelmholtzBEM (Failed)
184 - LimitTemperature2 (Failed)
187 - fluxsolver3 (Failed)
188 - elstat_infty (Failed)
189 - pointdir (Failed)
190 - structmap (Failed)
191 - stress (Failed)
192 - savescalars_boundary (Failed)
194 - elasticity (Failed)
196 - RotatingBCMagnetoDynamics (Failed)
197 - CurvedBndryPFEM (Failed)
198 - CoupledPoisson2 (Failed)
199 - diffuser_sa (Failed)
200 - InductionHeating (Failed)
201 - DisContBoundaryDoubleMortar (Failed)
202 - BoundaryFluxes2 (Failed)
203 - mgdyn_steady_piolaversion (Failed)
204 - DisContBoundary3D (Failed)
205 - mgdyn_lamstack_lowfreq_transient (Failed)
206 - StructuredHeightDepth (Failed)
207 - AdvDiffHandles3 (Failed)
209 - RigidMeshMapper2 (Failed)
210 - mgdyn_transient (Failed)
211 - mgdyn_lamstack_lowfreq_harmonic (Failed)
212 - CoordinateTrans2 (Failed)
213 - bentonite (Failed)
214 - FlowResSlip (Failed)
215 - DisContBoundaryNodalProj (Failed)
216 - HelmholtzStructure2 (Failed)
217 - AnalyticalTest (Failed)
218 - ContactFrictionNonlin (Failed)
219 - Step_sa (Failed)
220 - MortarMixedDimensions (Failed)
221 - ParticleAdvector3 (Failed)
224 - tresca (Failed)
225 - pmultg (Failed)
226 - ParticleAdvector2 (Failed)
228 - BlockLinElast2 (Failed)
229 - buckling (Failed)
230 - reynolds3b (Failed)
231 - periodic_rot (Failed)
232 - BDM2D (Failed)
233 - CoupledPoisson3 (Failed)
234 - DisContBoundaryMortarJumpB (Failed)
235 - mgdyn2D_pm (Failed)
236 - levelset1 (Failed)
237 - bodyload (Failed)
238 - ConstantBCDisplacement (Failed)
239 - NaturalConvection (Failed)
240 - HelmholtzStructure3 (Failed)
241 - AdvDiffHandles (Failed)
242 - ModelPDE (Failed)
243 - DisContBoundaryDoubleNames (Failed)
244 - DirichletNeumann (Failed)
245 - SensTemperature (Failed)
246 - vortex2d (Failed)
247 - coating (Failed)
248 - StressEigen3D (Failed)
249 - mhd2 (Failed)
250 - elstat_source (Failed)
251 - ThermalBiMetal2 (Failed)
252 - DisContBoundaryDouble (Failed)
253 - structmap3 (Failed)
254 - ArteryOutlet (Failed)
255 - vortex3d (Failed)
256 - ParticleAdvector (Failed)
257 - RotatingBCMagnetoDynamics2 (Failed)
258 - ElmerGridExtrudeHelicity (Failed)
259 - mgdyn2D_em_harmonic (Failed)
260 - Step_sst-kw-wf (Failed)
261 - ExtrusionStructured2D (Failed)
262 - CoupledPoisson9 (Failed)
263 - ThermoElectric (Failed)
264 - RotatingBCMagnetoDynamicsGeneric (Failed)
266 - mgdyn_harmonic (Failed)
267 - CoordinateTrans (Failed)
268 - LimitTemperature (Failed)
269 - el_adaptivity (Failed)
270 - diffuser_v2f (Failed)
272 - StokesProj (Failed)
273 - Step_ke (Failed)
274 - HelmholtzFace (Failed)
275 - DisContBoundaryMortarCont (Failed)
276 - ElmerGridExtrudeMaterial2 (Failed)
277 - InductionHeating2 (Failed)
278 - reynolds3 (Failed)
279 - NormalTangentialDisplacement (Failed)
280 - savescalars (Failed)
281 - linearsolvers_cmplx (Failed)
283 - plates (Failed)
285 - TimeFunc (Failed)
286 - normals (Failed)
287 - AdvDiffFCT (Failed)
288 - ParticleAdvectorPathIntegral (Failed)
289 - HelmholtzPlaneWaves (Failed)
290 - PhaseChange2 (Failed)
291 - OptimizeSimplexFourHeaters (Failed)
292 - ParticleHeating (Failed)
293 - mgdyn_anisotropic_cond (Failed)
294 - BlockPoisson2 (Failed)
295 - DivergenceAnalytic2D (Failed)
296 - WeightComputation (Failed)
297 - CoupledPoisson6 (Failed)
298 - RaviartThomas3D (Failed)
299 - 1sttime (Failed)
300 - platesEigen (Failed)
301 - WaveEqu (Failed)
302 - StrainCalculation02 (Failed)
304 - RichardsDyke2 (Failed)
305 - heateq_infty (Failed)
Errors while running CTest
I've used the elmer version 6.1 before a little bit and made a working vortex shedding example, so I thought to open the ElmerGUI and see if there are other things that may point me to the solution. In the solver log, I got the following:
Code: Select all
ELMER SOLVER (v 7.0) STARTED AT: 2015/04/15 16:32:11
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Library version: 7.0 (Rev: 24ae551)
MAIN: HYPRE library linked in.
MAIN: MUMPS library linked in.
MAIN: =============================================================
MAIN:
MAIN:
MAIN: -------------------------------------
MAIN: Reading Model: case.sif
Loading user function library: [FlowSolve]...[FlowSolver_Init0]
Program received signal SIGSEGV: Segmentation fault - invalid memory reference.
Backtrace for this error:
#0 0xB72B8163
#1 0xB72B8800
#2 0xB77843FF
#3 0x0
Best regards, Elan.
P.s. Thank you for quick reply Peter, I've gone along with this process and it appears that this matter persist.
P.s.s. I think it's also worth mentioning that when I use the installation from launchpad and use the vortex shedding example the same error occurs. Would it mean that there is something that I'm missing?
Re: Cmake based Elmer distributions
Hello,
I've got a Problem while building elmer with cmake, codeblocks and MinGW.
Now I have made it step by step and at the Moment i'm hanging on BLAS ?!
Cmake said:
Should I add another variable to PATH?
greetings
Kai
I've got a Problem while building elmer with cmake, codeblocks and MinGW.
Now I have made it step by step and at the Moment i'm hanging on BLAS ?!
Cmake said:
Code: Select all
Checking whether GFortran version >= 4.8 -- yes
CMake Error at C:/Program Files/cmake-3.6.0-rc1-win64-x64/share/cmake-3.6/Modules/FindBLAS.cmake:690 (message):
A required library with BLAS API not found. Please specify library
location.
Call Stack (most recent call first):
CMakeLists.txt:152 (FIND_PACKAGE)
Should I add another variable to PATH?
greetings
Kai
- Attachments
-
- CMAKE ENTRY BLAS
- cmake_entrys.JPG (72.59 KiB) Viewed 16276 times