Hi group,
I have solved a incompressible navier-stokes simulation (laminar) and the results converged, but it was oscilating until at the end , as show in the figure. why it was occurred? Is it a problem?
Thanks,
Rodrigo
convergence line oscilating
-
- Posts: 16
- Joined: 04 May 2010, 18:20
convergence line oscilating
- Attachments
-
- convergence history.JPG (75.76 KiB) Viewed 1779 times
-
- Site Admin
- Posts: 4856
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: convergence line oscilating
Hi Rodrigo
The oscillation is related to the nonlinearity of the system. As long as you reach convergence there is no need to worry. You might try setting "Nonlinear System Relaxation Factor" to 0.5-0.7 to supress the oscillations.
-Peter
The oscillation is related to the nonlinearity of the system. As long as you reach convergence there is no need to worry. You might try setting "Nonlinear System Relaxation Factor" to 0.5-0.7 to supress the oscillations.
-Peter