Hello,
I'm new user of elmerice. I want to know how to install the Elmer/Ice ? Is there a detailed tutorials on Ubuntu 16.04.
I refer the link http://elmerfem.org/elmerice/wiki/doku. ... ationcmake
But it always failed.
Any suggest will help me a lot.
Elmer ice install
Re: Elmer ice install
Hi,
for generic Elmer, see here: viewtopic.php?f=2&t=1, especially the last post.
However I don't know what has to be done additionnally for Elmer/Ice.
HTH,
Matthias
for generic Elmer, see here: viewtopic.php?f=2&t=1, especially the last post.
However I don't know what has to be done additionnally for Elmer/Ice.
HTH,
Matthias
Re: Elmer ice install
Thank you for your replr, but it's different with elmer/ice install.
Anyone can offer a hint. Such as https://docplayer.net/52985860-Elmer-ice-git-cmake.html
Anyone can offer a hint. Such as https://docplayer.net/52985860-Elmer-ice-git-cmake.html
Re: Elmer ice install
Hi Andali,
If you want Elmer/Ice to be installed, the installation is exactly the same as for Elmer but with the option
-DWITH_ElmerIce:BOOL=TRUE
in your installation configuration file.
More information on the Elmer/Ice wiki: http://elmerfem.org/elmerice/wiki/doku. ... ationcmake
Regards,
Olivier
If you want Elmer/Ice to be installed, the installation is exactly the same as for Elmer but with the option
-DWITH_ElmerIce:BOOL=TRUE
in your installation configuration file.
More information on the Elmer/Ice wiki: http://elmerfem.org/elmerice/wiki/doku. ... ationcmake
Regards,
Olivier
Re: Elmer ice install
Thank you. I have type
sudo apt-add-repository ppa:elmer-csc-ubuntu/elmer-csc-ppa
sudo apt-get update
sudo apt-get install elmerfem-csc-eg
And it means that I have installed elmer/ice?
Would I still continue to instill it according to http://elmerfem.org/elmerice/wiki/doku. ... ationcmake ?
sudo apt-add-repository ppa:elmer-csc-ubuntu/elmer-csc-ppa
sudo apt-get update
sudo apt-get install elmerfem-csc-eg
And it means that I have installed elmer/ice?
Would I still continue to instill it according to http://elmerfem.org/elmerice/wiki/doku. ... ationcmake ?
Re: Elmer ice install
Hello,
yes, the launchpad version should include Elmer/Ice
Regards,
Thomas
yes, the launchpad version should include Elmer/Ice
Regards,
Thomas
Re: Elmer ice install
Thank you. But the launchpad version may not replace elmerice install. So I try to give up.
(1)Additonly I use cmake based on ubuntu14.04 http://elmerfem.org/forum/viewtopic.php?f=2&t=3742
When I configure , I didn't choose ( PYTHONQT ElmerGUILOGGER ElmerGUITESTER ) due to some errors. I didn't know is it requiste? After I finished installing. I type
$ ctest -j1
The following tests FAILED:
4 - Calving3D (Failed)
7 - ScatteredDataInterpolator (Failed)
14 - DGsolver (Failed)
15 - Teterousse_DeformHeat (Failed)
26 - MISMIP_FS-SSA (Failed)
284 - radiation2d (Failed)
392 - InductionHeating2 (Failed)
487 - radiation2 (Failed)
621 - radiation3d (Failed)
666 - radiation (Failed)
Errors while running CTest
(2) I test the example testglacierflowline2018
$gmsh -2 testglacier.geo
Error : 'testglacier.geo', line 1 : syntax error (,)
Error : 'testglacier.geo', line 2 : syntax error (,)
Error : 'testglacier.geo', line 3 : Unknown variable 'backres'
Error : 'testglacier.geo', line 4 : Unknown variable 'frontres'
Error : 'testglacier.geo', line 5 : Unknown variable 'frontres'
Error : 'testglacier.geo', line 6 : Unknown variable 'backres'
Error : 'testglacier.geo', line 7 : Unknown variable 'backres'
Info : Done reading 'testglacier.geo'
$ElmerGrid 14 2 testglacier.msh –autoclean –order 0.1 1.0 0.01
$ElmerSolver Stokes_diagnostic.sif
Program received signal SIGSEGV: Segmentation fault - invalid memory reference.
Backtrace for this error:
#0 0x7F3FD93B8777
#1 0x7F3FD93B8D7E
#2 0x7F3FD900CCAF
#3 0x7F3FD973BAA2
#4 0x7F3FD973430B
#5 0x7F3FD9D0085F
#6 0x7F3FD9D03246
#7 0x7F3FD9CF5FB2
#8 0x401280 in MAIN__ at Solver.F90:?
Segmentation fault (core dumped)
I didn't know whether I have succed to install elmer/ice?
And how to solve the test error or tutorials example mistakes?
(1)Additonly I use cmake based on ubuntu14.04 http://elmerfem.org/forum/viewtopic.php?f=2&t=3742
When I configure , I didn't choose ( PYTHONQT ElmerGUILOGGER ElmerGUITESTER ) due to some errors. I didn't know is it requiste? After I finished installing. I type
$ ctest -j1
The following tests FAILED:
4 - Calving3D (Failed)
7 - ScatteredDataInterpolator (Failed)
14 - DGsolver (Failed)
15 - Teterousse_DeformHeat (Failed)
26 - MISMIP_FS-SSA (Failed)
284 - radiation2d (Failed)
392 - InductionHeating2 (Failed)
487 - radiation2 (Failed)
621 - radiation3d (Failed)
666 - radiation (Failed)
Errors while running CTest
(2) I test the example testglacierflowline2018
$gmsh -2 testglacier.geo
Error : 'testglacier.geo', line 1 : syntax error (,)
Error : 'testglacier.geo', line 2 : syntax error (,)
Error : 'testglacier.geo', line 3 : Unknown variable 'backres'
Error : 'testglacier.geo', line 4 : Unknown variable 'frontres'
Error : 'testglacier.geo', line 5 : Unknown variable 'frontres'
Error : 'testglacier.geo', line 6 : Unknown variable 'backres'
Error : 'testglacier.geo', line 7 : Unknown variable 'backres'
Info : Done reading 'testglacier.geo'
$ElmerGrid 14 2 testglacier.msh –autoclean –order 0.1 1.0 0.01
$ElmerSolver Stokes_diagnostic.sif
Program received signal SIGSEGV: Segmentation fault - invalid memory reference.
Backtrace for this error:
#0 0x7F3FD93B8777
#1 0x7F3FD93B8D7E
#2 0x7F3FD900CCAF
#3 0x7F3FD973BAA2
#4 0x7F3FD973430B
#5 0x7F3FD9D0085F
#6 0x7F3FD9D03246
#7 0x7F3FD9CF5FB2
#8 0x401280 in MAIN__ at Solver.F90:?
Segmentation fault (core dumped)
I didn't know whether I have succed to install elmer/ice?
And how to solve the test error or tutorials example mistakes?
-
- Posts: 4
- Joined: 09 Feb 2018, 23:27
- Antispam: Yes
Re: Elmer ice install
Hi AndaLi,
I'm not sure if you've solved your problems with the install, but my colleague put together a Docker Image for Elmer/Ice for easy use.
1. Install Docker on your computer: https://www.docker.com/get-started (it's free)
2. Follow the directions on: https://hub.docker.com/r/nwrichmond/elmerice/
This allows you to run Elmer/Ice as normal, and without having to install all the Fortran packages and compile the program. Hopefully this helps if you are still having trouble!
Best,
Kate
I'm not sure if you've solved your problems with the install, but my colleague put together a Docker Image for Elmer/Ice for easy use.
1. Install Docker on your computer: https://www.docker.com/get-started (it's free)
2. Follow the directions on: https://hub.docker.com/r/nwrichmond/elmerice/
This allows you to run Elmer/Ice as normal, and without having to install all the Fortran packages and compile the program. Hopefully this helps if you are still having trouble!
Best,
Kate