Can't find Static Current Conduction solver

Discussion about building and installing Elmer
Post Reply
Sheeppowa
Posts: 7
Joined: 19 Jul 2019, 15:54
Antispam: Yes

Can't find Static Current Conduction solver

Post by Sheeppowa »

Hello everyone,

I am a new user of Elmer and would like to use this software to simulate the Joule effect through a stainless steel.

I've already been able to go around the forum and find topics related to asking me but what I can't explain is that I can't find the tab that allows me to ask Elmer to use the appropriate solver for the Joule effect. I also downloaded two images showing the "Equation" and "Body force" menu in Elmer to see what I have access to.

The installed version is the most recent, namely 8.3, download from the "sourceforge" link on Elmer's website https://www.csc.fi/web/elmer/binaries

Should we add data to the existing library or is everything normally there?

The option I can't get can be seen if the "Joule-Heating Actuator" image of this link viewtopic.php?f=4&t=1938&p=5992&hilit=joule#p5992, in 1st answer.

If there was ever a

Thank you very much,

Have a good day.
Attachments
Image of Equation menu in Elmer
Image of Equation menu in Elmer
Photo Equation.JPG (43.3 KiB) Viewed 2963 times
Image of Body force menu in Elmer
Image of Body force menu in Elmer
Photo body force.JPG (39.73 KiB) Viewed 2963 times
Sheeppowa
Posts: 7
Joined: 19 Jul 2019, 15:54
Antispam: Yes

Re: Can't find Static Current Conduction solver

Post by Sheeppowa »

Thank you !!
Post Reply