When I try to open the .unv file in ElmerGUI the program becomes unresponsive and crashes abruptly after a few seconds. I have also tried converting the .unv mesh into an elmer mesh using ElmerGrid but it hasn't been able to produce an output file. The command line output is below:
Code: Select all
Elmergrid 8 2 .\Diamond.unv
Starting program Elmergrid
Elmergrid reading in-line arguments
Output will be saved to file .\Diamond.
Elmergrid loading data:
-----------------------
Reading mesh from universal mesh file .\Diamond.unv.
First round for allocating data
Units dataset content is currently omitted!
Part UID = 1
Part name = SMESH_Mesh
Coord system name = Global
There are 281539 nodes in the mesh
Element type range in mesh [203,510]
Allocating mesh with 281539 nodes and 244629 10-node elements in 3 dims.
Physical index interval is [2,2]
Group index interval is [1,1262]
Using offset 1261 for physical indexes
Second round for reading data
Reading Coordinate system information
Reading node coordinates
Reading element topologies
Reading element groups in mode 2467
Reading 1:th group with index 1 with 2039 entities: rx1
Element type range in group is [510 510]
...
Reading 1262:th group with index 1262 with 14 entities: Face_45
Element type range in group is [306 306]
Moving bulk elements to boundary elements
Leading bulk elementtype is 510
Trailing bulk elementtype is 203
Checking that different dimensions have unique boundary tags!
Tag interval for boundaries: [1 1263]
No overlap, no offsets needed!
There are 31677 (out of 244629) lower dimensional elements.
Node 13095 belongs to maximum of 70 elements