Do you have any suggestions?
-
- Posts: 1
- Joined: 24 Jun 2023, 16:05
- Antispam: Yes
Do you have any suggestions?
Hello, I'm currently tasked with examining thermal conduction between two 2D bodies that are in contact along a line. There's internal heat generation at this interface, specified as W/m². Do you have any suggestions on how to tackle this issue using the HeatSolver solver, aside from the approach of defining a thin region at the interface?
-
- Posts: 2317
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: Do you have any suggestions?
If your two bodies share nodes at the interface heat will transfer. If not you can use mortar boundary conditions to transfer heat
-
- Posts: 2317
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
-
- Site Admin
- Posts: 4832
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Do you have any suggestions?
Hi David,
Do you have a jump in temperature i.e. is the contact between the different bodies good or poor?
-Peter
Do you have a jump in temperature i.e. is the contact between the different bodies good or poor?
-Peter