If this will help to find the error !!!!!
**********Sif file
Header
CHECK KEYWORDS "Warn"
Mesh DB "." "exportmesh"
End
Simulation
Max Output Level = 9
Coordinate System = "Cartesian 3D"
Coordinate Mapping(3) = 1 2 3
Simulation Type = Steady state
Steady State Max Iterations = 1
Output Intervals = 1
Post File= "xyz.ep"
End
Constants
Permittivity of Vacuum = 8.8542e-12
End
Solver 1
Exec Solver = Before Simulation
Procedure = "StatCurrentSolve" "StatCurrentSolver"
Equation = "Stat Current Solver"
Variable = Potential
Variable DOFs = 1
Calculate Volume Current = True
Calculate Joule Heating = False
Current Control = Real 12.5 ! 1/4th of 50 A
Linear System Solver = Iterative
Linear System Iterative Method = CG
Linear System Max Iterations = 1000
Linear System Convergence Tolerance = 1.0e-6
Linear System Preconditioning = ILU0
Linear System Abort Not Converged = True
Linear System Residual Output = 1
End
Solver 2
Equation = "MGDynamics"
Variable = "P"
Procedure = "MagnetoDynamics" "WhitneyAVSolver"
Fix Input Current Density = Logical True
Newton-Raphson Iteration = Logical True
Nonlinear System Max Iterations = 30
Nonlinear System Convergence Tolerance = 1e-6
Linear System Symmetric = Logical True
Linear System Solver = "Iterative"
Linear System Preconditioning = None
Linear System Convergence Tolerance = 1e-8
Linear System Residual Output = 100
Linear System Max Iterations = 5000
Linear System Iterative Method = CG
Steady State Convergence Tolerance = 1e-6
!Automated Source Projection BCs= Logical False
End
Solver 3
Equation = "MGDynamicsCalc"
Procedure = "MagnetoDynamics" "MagnetoDynamicsCalcFields"
Linear System Symmetric = True
Potential Variable = String "P"
Calculate Magnetic Field Strength = Logical True
Steady State Convergence Tolerance = 0
Linear System Solver = "Iterative"
Linear System Preconditioning = None
Linear System Residual Output = 0
Linear System Max Iterations = 5000
Linear System Iterative Method = CG
Steady State Convergence Tolerance = 1e-6
Linear System Convergence Tolerance = 1.0e-8
End
Solver 4
Exec Solver = String "after all"
exec interval = 1
Equation = String "ResultOutput"
Procedure = File "ResultOutputSolve" "ResultOutputSolver"
Output File Name = File "emag."
Output Format = String "vtk"
Vtk Format = Logical True
End
Equation 1
Name = "Coupled Equations"
Active Solvers(2) = 2 3
End
Equation 2
Name = "Coupled Equations"
Active Solvers(3) = 1 2 3
End
Material 1
Name = "Air"
Electric Conductivity = 0.0
Relative Permeability = 1.0
End
Material 2
Name = "Copper"
Electric Conductivity = 58.14e6
Relative Permeability = 1.0
End
Body 1
Name = "Air"
Target Bodies(1) = 1
Equation = 1
Material = 1
End
Body 2
Name = "Coil"
Target Bodies(1) = 2
Equation = 2
Material = 2
Body Force = 1
End
Boundary Condition 1
Name = "BC Potential"
Target Boundaries(1) =7
P {e}= real 0
P = Real 0
Potential = 0.001
End
Boundary Condition 2
Name = "BC Voltage Ground"
Target Boundaries(1) = 8
P {e} = Real 0
P = Real 0
Potential = 0.0
End
Boundary Condition 3
Name = "BCn Flux Parallel"
Target Boundaries(6) = 1 2 3 4 5 6 7 8
P {e} = Real 0
P = Real 0.0
End
Body Force 1
Name = "Current Density"
Current Density 1 = Equals Volume current 1
Current Density 2 = Equals Volume current 2
Current Density 3 = Equals Volume current 3
End
WhitneyAV 3D coupled current emag of a coil
-
- Posts: 8
- Joined: 16 Jul 2018, 10:17
- Antispam: Yes
Re: WhitneyAV 3D coupled current emag of a coil
Hi,
I am have the same problem.
Is there a working solution so far?
What are other possibilities to get convergence in the current solver?
I appreciate every hint to solve the problem!
Best regards
Phlix
I am have the same problem.
Is there a working solution so far?
What are other possibilities to get convergence in the current solver?
I appreciate every hint to solve the problem!
Best regards
Phlix
Re: WhitneyAV 3D coupled current emag of a coil
Hi all,
out of curiosity, did anybody check how the mesh looks like before running the simulation?
I mean, have a look at the pictures below, it doesn't look good... I suspect this is the reason why the solver is not converging. If you are still interested in this model I have prepared something similar here: viewtopic.php?f=3&t=6427&p=20338#p20262
There you will find a lo of information about current solvers and how do they work coupled with the magnetic solver.
Regards,
Marco
out of curiosity, did anybody check how the mesh looks like before running the simulation?
I mean, have a look at the pictures below, it doesn't look good... I suspect this is the reason why the solver is not converging. If you are still interested in this model I have prepared something similar here: viewtopic.php?f=3&t=6427&p=20338#p20262
There you will find a lo of information about current solvers and how do they work coupled with the magnetic solver.
Regards,
Marco
Last edited by lazyTom on 10 Jun 2019, 13:16, edited 1 time in total.
-
- Posts: 8
- Joined: 16 Jul 2018, 10:17
- Antispam: Yes
Re: WhitneyAV 3D coupled current emag of a coil
Hello Everyone,
I am using this module to generate magnetic field in 3D around a current carrying coil. In this the first solver being used is a STAT CURRENT SOLVER, where we apply some Voltage as boundary conditions. Is it possible to set a constant current in the coil instead of applying a voltage BC? Is there a different solver for this or do we need to make some modifications in the STAT CURRENT Solver? Could anyone provide any guidelines or send a link to a sample project for reference? Thanks!
Tapas
I am using this module to generate magnetic field in 3D around a current carrying coil. In this the first solver being used is a STAT CURRENT SOLVER, where we apply some Voltage as boundary conditions. Is it possible to set a constant current in the coil instead of applying a voltage BC? Is there a different solver for this or do we need to make some modifications in the STAT CURRENT Solver? Could anyone provide any guidelines or send a link to a sample project for reference? Thanks!
Tapas
Re: WhitneyAV 3D coupled current emag of a coil
Hi,
you can set a constant current as boundary condition, see models manual.
HTH,
Matthias
you can set a constant current as boundary condition, see models manual.
HTH,
Matthias