Hello,How did the elmer find the boundary conditions?

Extension of Elmer in computational glaciology
Post Reply
jeffjoy
Posts: 20
Joined: 10 Nov 2020, 04:01
Antispam: Yes

Hello,How did the elmer find the boundary conditions?

Post by jeffjoy »

Dear friends,I use the two different conditions,i delete a lateral condition,but the result is so different,Result as the picture,the first's surface is the second's bed.i don't know why? Do you know? Thank you,brother!

Code: Select all

Boundary Condition 1
  ComputeNormal = Logical False
  Name = "sides1"
  Target Boundaries(1) = 1
  Flowdepth Skip = Logical True
End

Boundary Condition 2
  ComputeNormal = Logical False
  Name = "sides2"
  Target Boundaries(1)  = 2
End

!! DON'T CHANGE ORDER OF NEXT 2 BC's!
!! They are automaticaly created in internal extrusion
!! bedrock:
Boundary Condition 3
  ComputeNormal = Logical True
  Name = "bedrock"
  Flow Force BC = Logical True
  Bottom Surface = Equals "bedrockDEM"
  Bedrock = Logical True
  !Height = 0.0
End

Boundary Condition 4
  ComputeNormal = Logical False
  Name = "surface"
  Top Surface = Equals "surfaceDEM"

! Referred by: Exported Variable 2 Mask = ...
  Surface = Logical True

  Depth = Real 0.0
End

Code: Select all

Boundary Condition 1
  ComputeNormal = Logical False
  Name = "side"
  Target Boundaries(1) = 1
  Flowdepth Skip = Logical True
End

Boundary Condition 2
  ComputeNormal = Logical True
  Name = "bedrock"
  Flow Force BC = Logical True
  Bottom Surface = Equals "bedrockDEM"
  Bedrock = Logical True
  !Height = 0.0
End

Boundary Condition 3
  ComputeNormal = Logical False
  Name = "surface"
  Top Surface = Equals "surfaceDEM"

! Referred by: Exported Variable 2 Mask = ...
  Surface = Logical True

  Depth = Real 0.0
End
Attachments
图像 8.png
(119.05 KiB) Not downloaded yet
raback
Site Admin
Posts: 4454
Joined: 22 Aug 2009, 11:57
Antispam: Yes
Location: Espoo, Finland
Contact:

Re: Hello,How did the elmer find the boundary conditions?

Post by raback »

Hi

You're probably using internal extrusion to make the 3D mesh. This generates automatically the top and bottom surfaces using the 1st free indexes. So unfortunately you should now how many BCs are there in the mesh and give the next free indexes to that.

-Peter
Post Reply