Hello,
I was wondering if you all had a moment to look at this error I am running into.
It is about the _bulk file not being found.
ELMER SOLVER (v 9.0) STARTED AT: 2024/03/06 15:33:26
--------------------------------------------------------------------------
The library attempted to open the following supporting CUDA libraries,
but each of them failed. CUDA-aware support is disabled.
libcuda.so.1: cannot open shared object file: No such file or directory
libcuda.dylib: cannot open shared object file: No such file or directory
/usr/lib64/libcuda.so.1: cannot open shared object file: No such file or directory
/usr/lib64/libcuda.dylib: cannot open shared object file: No such file or directory
If you are not interested in CUDA-aware support, then run with
--mca opal_warn_on_missing_libcuda 0 to suppress this message. If you are interested
in CUDA-aware support, then try setting LD_LIBRARY_PATH to the location
of libcuda.so.1 to get passed this issue.
--------------------------------------------------------------------------
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage
http://www.csc.fi/elmer, Email
elmeradm@csc.fi
MAIN: Version: 9.0 (Rev: 416941d5, Compiled: 2022-05-11)
MAIN: Running one task without MPI parallelization.
MAIN: Running in parallel with 2 threads per task.
MAIN: =============================================================
LoadInputFile: Trying to read "Run Control" section only
MAIN:
MAIN:
MAIN: -------------------------------------
MAIN: Reading Model: case.sif
LoadInputFile: Scanning input file: case.sif
LoadInputFile: Scanning only size info
LoadInputFile: First time visiting
LoadInputFile: Reading base load of sif file
LoadInputFile: Loading input file: case.sif
LoadInputFile: Reading base load of sif file
LoadInputFile: Number of BCs: 2
LoadInputFile: Number of Body Forces: 0
LoadInputFile: Number of Initial Conditions: 1
LoadInputFile: Number of Materials: 3
LoadInputFile: Number of Equations: 1
LoadInputFile: Number of Solvers: 4
LoadInputFile: Number of Bodies: 3
ListTagKeywords: Setting weight for keywords!
ListTagKeywords: No parameters width suffix: normalize by area
ListTagKeywords: Setting weight for keywords!
ListTagKeywords: No parameters width suffix: normalize by volume
ElmerAsciiMesh: Base mesh name: ./.
MAIN: -------------------------------------
OptimizeBandwidth: ---------------------------------------------------------
OptimizeBandwidth: Computing matrix structure for: statcurrentsolver...done.
OptimizeBandwidth: Half bandwidth without optimization: 24
OptimizeBandwidth:
OptimizeBandwidth: Bandwidth Optimization ...done.
OptimizeBandwidth: Half bandwidth after optimization: 16
OptimizeBandwidth: ---------------------------------------------------------
[
color=#FF8000]_bulk: cannot open shared object file: No such file or directory
_bulk.so: cannot open shared object file: No such file or directory
./_bulk: cannot open shared object file: No such file or directory
./_bulk.so: cannot open shared object file: No such file or directory
/home/aevanch/scilib/share/elmersolver/lib/_bulk: cannot open shared object file: No such file or directory
/home/aevanch/scilib/share/elmersolver/lib/_bulk.so: cannot open shared object file: No such file or directory[/color]
Thank you,
Anna