Temperature plotted in non activated body
Re: Temperature plotted in non activated body
Thanks a lot, I will try this and keep you informed.
Re: Temperature plotted in non activated body
Hi,
Just for information about using the Theeshold filter here attached is a plot of the time dependant "Crystal Growth in Cold Crucible" model which shows (at t=200s):
- temperature field (colour) in the liquid/solid Silcon body (the phase change interface is the thick white line)
-magnetic flux density (Y component in colour) in the air surrounding the Silicon
- liquid/solid streamlines (in white) in the Silicon with the solid crystal pulled out on the top
- yellow arrows of the magnetic flux density
As already discussed this model is in encouraging progress with some points remaining to improve (mesh refinement, longer physical time solving, etc...).
Just for information about using the Theeshold filter here attached is a plot of the time dependant "Crystal Growth in Cold Crucible" model which shows (at t=200s):
- temperature field (colour) in the liquid/solid Silcon body (the phase change interface is the thick white line)
-magnetic flux density (Y component in colour) in the air surrounding the Silicon
- liquid/solid streamlines (in white) in the Silicon with the solid crystal pulled out on the top
- yellow arrows of the magnetic flux density
As already discussed this model is in encouraging progress with some points remaining to improve (mesh refinement, longer physical time solving, etc...).