Hi There!
I'm looking to extract the residual from the Elmer/Ice EnthalpySolver that arises from complying with the Enthalpy_h upper limit inequality.
I can set the limit in the <Body Force> section as e.g. <Enthalpy_h Upper Limit = Real 143000.0> but from looking through the EnthalpySolver.F90 source code I am unable to locate the required keyword or .sif section for exporting the residual.
Any advice much appreciated.
Best,
Rob
Obtaining residual values from the EnthalpySolver

 Posts: 1210
 Joined: 25 Jan 2019, 01:28
 Antispam: Yes
Re: Obtaining residual values from the EnthalpySolver
You could try a unix/linux approach to capture the residual using pipe and grep
ElmerSolver case.sif  grep "residual" > outputlog.txt
ElmerSolver case.sif  grep "residual" > outputlog.txt
Re: Obtaining residual values from the EnthalpySolver
Thanks for this, I'll try it out start of next week and get back to you.

 Site Admin
 Posts: 4173
 Joined: 22 Aug 2009, 11:57
 Antispam: Yes
 Location: Espoo, Finland
 Contact:
Re: Obtaining residual values from the EnthalpySolver
Hi Rob,
So you want to know who computed the r=Axb?
I think it is hidden as a library operation behind DefaultSolve. The A and b are stored before setting Dirichlet BCs (on BCs or bodies) and after the simulation the residual is computed. The soft limiter activates this as does "calculate loads = true".
Also you could be looking at the error of a nonlinear system the L2 norm of which may appear in the output and Kevin is probably referring to this possibility.
Peter
So you want to know who computed the r=Axb?
I think it is hidden as a library operation behind DefaultSolve. The A and b are stored before setting Dirichlet BCs (on BCs or bodies) and after the simulation the residual is computed. The soft limiter activates this as does "calculate loads = true".
Also you could be looking at the error of a nonlinear system the L2 norm of which may appear in the output and Kevin is probably referring to this possibility.
Peter
Re: Obtaining residual values from the EnthalpySolver
Hi Peter,
That's really useful, thanks for the explanation.
That's really useful, thanks for the explanation.
Re: Obtaining residual values from the EnthalpySolver
Hi Peter,
That all works and I found out some interesting stuff about DefaultSolve, thanks!
That all works and I found out some interesting stuff about DefaultSolve, thanks!