Nodal Forces with permanent magnet

Numerical methods and mathematical models of Elmer
Post Reply
MartinHoeijmakers
Posts: 37
Joined: 22 Oct 2017, 21:03
Antispam: Yes

Nodal Forces with permanent magnet

Post by MartinHoeijmakers »

Hi all,

I'm investigating an electrical machine in 2D with embedded permanent magnets in the rotor.
If I calculate the torque by means of giving "r outer" and r Inner" (Arkkio's equation?) and compare it with the torque calculated by means of "Torque Groups" on the stator, the results are quite similar. However, if I calculate the torque by means of "Torque Groups" on the rotor the results are different (difference around 1%).
In Paraview, I saw nodal forces on several places in the rotor. I didn't understand the nodal forces around the magnets and tried to understand it.

I made a simple example (Magnet3.zip) with an iron circuit (light grey) around a magnet (red).
Magnet3.png
Magnet3.png (5.85 KiB) Viewed 3128 times
The magnet is magnetized in the x direction and in Paraview (the vtu file is in Magnet3.zip), I saw nodal forces (x component) on the iron sides of the small air gaps between iron and magnet. However, I missed the corresponding force on the magnet side.

Any help in understanding this problem is helpful.

With kind regards,
Martin Hoeijmakers
Attachments
Magnet3.zip
(901.33 KiB) Downloaded 225 times
Post Reply