Checking if my geometry is correct

The graphical user interface of Elmer
lmehdizadegannam
Posts: 24
Joined: 14 Apr 2021, 17:12
Antispam: Yes

Re: Checking if my geometry is correct

Post by lmehdizadegannam »

gmsh.
kevinarden
Posts: 2237
Joined: 25 Jan 2019, 01:28
Antispam: Yes

Re: Checking if my geometry is correct

Post by kevinarden »

To unit the edges in gmsh use the coherence command.
lmehdizadegannam
Posts: 24
Joined: 14 Apr 2021, 17:12
Antispam: Yes

Re: Checking if my geometry is correct

Post by lmehdizadegannam »

Hi Kevin,

Thanks for all your help. I still have difficulty with gmsh. I want to have a cylinder (30.5 in y direction, radius 7.62). The cylinder is non-hollow and I want to mesh it somehow that it has nodes less than 80. I previously did that in the wrong direction. Now I cannot generate the right geometry. Can you help me? Thanks so much!
Attachments
12cylinder.msh
(4.43 KiB) Downloaded 190 times
12cylinder.geo
(171 Bytes) Downloaded 186 times
lmehdizadegannam
Posts: 24
Joined: 14 Apr 2021, 17:12
Antispam: Yes

Re: Checking if my geometry is correct

Post by lmehdizadegannam »

This is the geometry I generated before. I meant to assign 30.5 to y direction not x. Somehow I cannot regenerate this.
Attachments
cylinder_stl.msh
(4.87 KiB) Downloaded 184 times
rebaz
Posts: 3
Joined: 19 Nov 2017, 09:50
Antispam: Yes

Re: Checking if my geometry is correct

Post by rebaz »

I think there is nothing wrong with that
Graduated from Soran University with First Class Degree with Honours in Computer Science
Post Reply