How to apply multiple solver on one body

The graphical user interface of Elmer
sheetu
Posts: 26
Joined: 30 Mar 2021, 06:55
Antispam: Yes

How to apply multiple solver on one body

Post by sheetu »

I want to perform an Acoustic duct mode analysis. How can I do that with Elmer GUI?
kevinarden
Posts: 2237
Joined: 25 Jan 2019, 01:28
Antispam: Yes

Re: How to apply multiple solver on one body

Post by kevinarden »

sheetu
Posts: 26
Joined: 30 Mar 2021, 06:55
Antispam: Yes

Re: How to apply multiple solver on one body

Post by sheetu »

Thank you!
sheetu
Posts: 26
Joined: 30 Mar 2021, 06:55
Antispam: Yes

how to define Mortar BC?

Post by sheetu »

how to define Mortar BC for analysis of electric motors?
sheetu
Posts: 26
Joined: 30 Mar 2021, 06:55
Antispam: Yes

Re: How to apply multiple solver on one body

Post by sheetu »

I'm unable to find how to Activates the use of edge element basis functions for the mortar conditions.
I'm working on 3-D BLDC PM motor and for maxwell stress analysis, I'm using MagDyn solver.
kevinarden
Posts: 2237
Joined: 25 Jan 2019, 01:28
Antispam: Yes

Re: How to apply multiple solver on one body

Post by kevinarden »

https://github.com/ElmerCSC/elmerfem/bl ... s/case.sif

look at this test case, and others in the test directory
sheetu
Posts: 26
Joined: 30 Mar 2021, 06:55
Antispam: Yes

Re: How to apply multiple solver on one body

Post by sheetu »

Ok, Sir. I'll go through this. Thank you.
sheetu
Posts: 26
Joined: 30 Mar 2021, 06:55
Antispam: Yes

Re: How to apply multiple solver on one body

Post by sheetu »

how to calculate transmission loss analysis of a muffler using Elmer? Can anyone give some reference?
Post Reply