Hi, I have a problem can anyone help.
I use Windows and I have ElmerGui installed. I'm trying to run a .sif file, unfortunately I can't open it.
I used the hints on the forum, however, a message like the bottom appears.
C:\Users\Admin\Desktop\1f_silnik>elmersolver
ELMER SOLVER (v 8.4) STARTED AT: 2020/05/17 12:50:29
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Version: 8.4 (Rev: Release, Compiled: 2020-04-08)
MAIN: Running one task without MPI parallelization.
MAIN: Running with just one thread per task.
MAIN: Lua interpreted linked in.
MAIN: =============================================================
ERROR:: ElmerSolver: Unable to find ELMERSOLVER_STARTINFO, can not execute.
STOP 1
When I try to run the file by run
ElmerGui model.sif
runs only empty ElmerGui
Thank you for your help
Run the sif file by ElmerGui Windows
-
- Posts: 2301
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: Run the sif file by ElmerGui Windows
you don't have a
ELMERSOLVER_STARTINFO file
the ELMERSOLVER_STARTINFO
lists the sif file to run, in ElmerGUI you have to save project to get one prior to running
from the command line you can execute a sif by typing
ElmerSolver mycase.sif
without having a ELMERSOLVER_STARTINFO file
ELMERSOLVER_STARTINFO file
the ELMERSOLVER_STARTINFO
lists the sif file to run, in ElmerGUI you have to save project to get one prior to running
from the command line you can execute a sif by typing
ElmerSolver mycase.sif
without having a ELMERSOLVER_STARTINFO file
Re: Run the sif file by ElmerGui Windows
After trying to run ElmerSolver mycase.sif shows the same
C:\Users\Admin\Desktop\1f_silnik>ElmerSolver mycase.sif
ELMER SOLVER (v 8.4) STARTED AT: 2020/05/17 14:58:46
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Version: 8.4 (Rev: Release, Compiled: 2020-04-08)
MAIN: Running one task without MPI parallelization.
MAIN: Running with just one thread per task.
MAIN: Lua interpreted linked in.
MAIN: =============================================================
MAIN:
MAIN:
MAIN: -------------------------------------
MAIN: Reading Model: mycase.sif
ERROR:: ElmerSolver: Unable to find input file [mycase.sif], can not execute.
STOP 1
C:\Users\Admin\Desktop\1f_silnik>ElmerSolver mycase.sif
ELMER SOLVER (v 8.4) STARTED AT: 2020/05/17 14:58:46
ParCommInit: Initialize #PEs: 1
MAIN:
MAIN: =============================================================
MAIN: ElmerSolver finite element software, Welcome!
MAIN: This program is free software licensed under (L)GPL
MAIN: Copyright 1st April 1995 - , CSC - IT Center for Science Ltd.
MAIN: Webpage http://www.csc.fi/elmer, Email elmeradm@csc.fi
MAIN: Version: 8.4 (Rev: Release, Compiled: 2020-04-08)
MAIN: Running one task without MPI parallelization.
MAIN: Running with just one thread per task.
MAIN: Lua interpreted linked in.
MAIN: =============================================================
MAIN:
MAIN:
MAIN: -------------------------------------
MAIN: Reading Model: mycase.sif
ERROR:: ElmerSolver: Unable to find input file [mycase.sif], can not execute.
STOP 1
-
- Site Admin
- Posts: 4823
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: Run the sif file by ElmerGui Windows
Hi
Just a wild guess: Windows has added .txt as suffix to the sif file?
-Peter
Just a wild guess: Windows has added .txt as suffix to the sif file?
-Peter
Re: Run the sif file by ElmerGui Windows
Everything is working now;)
I am trying to use Elmer to simulate a single-phase motor with an auxiliary condenser winding
I am trying to use Elmer to simulate a single-phase motor with an auxiliary condenser winding
Re: Run the sif file by ElmerGui Windows
Can you please paste the message given by the ElmerSolver ?
The path of the solver input file must be defined to the ElmerSolver for the solve to run perfectly.
The path of the solver input file must be defined to the ElmerSolver for the solve to run perfectly.
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice