Dear all,
Among the variables that are exported to .vtu files, I would like to disable one variable.
I have already searched in the manual and in the source code of ResultOuputSolver.f90 but I couldn't find what I was looking for. Maybe I missed something.
Any suggestion?
Something like: Output Variable = Logical False
Thanks
Jeremie
ResultOuputSolver question
-
- Posts: 2368
- Joined: 25 Jan 2019, 01:28
- Antispam: Yes
Re: ResultOuputSolver question
Section 63 of the manual
https://www.nic.funet.fi/pub/sci/physic ... Manual.pdf
If you use the default output solver you get the default variables
Simulation
Max Output Level = 5
Coordinate System = Cartesian
Coordinate Mapping(3) = 1 2 3
Simulation Type = Steady state
Steady State Max Iterations = 1
Output Intervals(1) = 1
Solver Input File = case.sif
! Post File = casedef.vtu
End
If you use the results saver solver you only get the variables you ask for
Solver 2
Exec Solver = after saving
Equation = "result output"
Procedure = "ResultOutputSolve" "ResultOutputSolver"
Output File Name = "casetest"
Vtu Format = Logical True
Binary Output = Logical True ! binary format is the default
Single Precision = Logical True ! double precision is the default
In the Vtu format all fields are saved if the user does not list them explicitly.
Scalar Field 1 = String Potential
END
Equation 1
Name = "Equation 1"
Active Solvers(2) = 1 2
https://www.nic.funet.fi/pub/sci/physic ... Manual.pdf
If you use the default output solver you get the default variables
Simulation
Max Output Level = 5
Coordinate System = Cartesian
Coordinate Mapping(3) = 1 2 3
Simulation Type = Steady state
Steady State Max Iterations = 1
Output Intervals(1) = 1
Solver Input File = case.sif
! Post File = casedef.vtu
End
If you use the results saver solver you only get the variables you ask for
Solver 2
Exec Solver = after saving
Equation = "result output"
Procedure = "ResultOutputSolve" "ResultOutputSolver"
Output File Name = "casetest"
Vtu Format = Logical True
Binary Output = Logical True ! binary format is the default
Single Precision = Logical True ! double precision is the default
In the Vtu format all fields are saved if the user does not list them explicitly.
Scalar Field 1 = String Potential
END
Equation 1
Name = "Equation 1"
Active Solvers(2) = 1 2
-
- Site Admin
- Posts: 4841
- Joined: 22 Aug 2009, 11:57
- Antispam: Yes
- Location: Espoo, Finland
- Contact:
Re: ResultOuputSolver question
Additionally if you decleare variables you may use, for example:
-Peter
Code: Select all
Exported Variable 1 = -nooutput dummy
Re: ResultOuputSolver question
Ok thank you! I'll give it a try.
Jeremie
Jeremie