Hi,
Im using ElmerGUI with ElmerPost for calculating sound pressures. My geometry is a sphere in a box, but I only get values at the surfaces of the box and of the sphere. My goal is to get values in the volume. I still tried to change Edit->ObjectClipPlanes but there are no values in the volume at all. The volume is meshed, but I cant see the mesh after importing from gmsh to ElmerGUI! Only the mesh of the surfaces.
Thank you for your help!
Axel
Pressure values within a volume
Re: Pressure values within a volume
Hi,
to check if the volume mesh has been imported, you can
* open Model-> Summary and check if it says that there are volume elements
* select View -> Volume mesh and check if it displays a volume mesh.
HTH,
Matthias
to check if the volume mesh has been imported, you can
* open Model-> Summary and check if it says that there are volume elements
* select View -> Volume mesh and check if it displays a volume mesh.
HTH,
Matthias
Re: Pressure values within a volume
Hi Matthias,
thank you for the fast and helpful reply! There are meshes within the volume.
But I still cant find the option to see the values within the volume!
Regards,
Axel
thank you for the fast and helpful reply! There are meshes within the volume.
But I still cant find the option to see the values within the volume!
Regards,
Axel
Re: Pressure values within a volume
Hi,
in ElmerPost:
* Display -> Contour Surfaces
* in the "isosurfaces" box:
- increase the number of isosurfaces
- contour variable: nodes_x (if your clip plane is in x)
- color variable: the variable you want to see
- surface style: surface
* don't forget to click "Apply"...
HTH,
Matthias
in ElmerPost:
* Display -> Contour Surfaces
* in the "isosurfaces" box:
- increase the number of isosurfaces
- contour variable: nodes_x (if your clip plane is in x)
- color variable: the variable you want to see
- surface style: surface
* don't forget to click "Apply"...
HTH,
Matthias
Re: Pressure values within a volume
Yeah! Perfect!
Thanks a lot!
Thanks a lot!