2D (triangular) Mesh generator with equal triangles
Posted: 28 Feb 2011, 15:56
Hi,
to create a model i need a special trick: i want to distribute points on a non-symmetric plane surface A. Then i want to use these points as fixed points of this plane surface and investigate the bending of a thin plate with the surface A.
My problem: How to distribute this points. I started with using gmsh (and using the nodes as my support points). But i need this points to be distributed as equal as possible. So the distance of a point to it's nearest neighbour should be in a tight range (e.g. nominal distance is 5mm, then allowed distance is 4.5 till 5.5 mm).
May be one of you no's a mesh-generator or a meshing algorithm which creates nearly equal traingles (with nearly equal angles).
This would be really helpfull.
Thank you!!
Best regards
to create a model i need a special trick: i want to distribute points on a non-symmetric plane surface A. Then i want to use these points as fixed points of this plane surface and investigate the bending of a thin plate with the surface A.
My problem: How to distribute this points. I started with using gmsh (and using the nodes as my support points). But i need this points to be distributed as equal as possible. So the distance of a point to it's nearest neighbour should be in a tight range (e.g. nominal distance is 5mm, then allowed distance is 4.5 till 5.5 mm).
May be one of you no's a mesh-generator or a meshing algorithm which creates nearly equal traingles (with nearly equal angles).
This would be really helpfull.
Thank you!!
Best regards