Hello,
I have a problem with Salome exporting different bodies to Elmer.
Could someone help me?
The attached file is my Salome study.
PS: by the way why is .hdf not allowed for upload?
Salome wrong body in Elmer
-
- Posts: 27
- Joined: 13 Aug 2013, 16:50
- Antispam: Yes
Salome wrong body in Elmer
- Attachments
-
- eddy.zip
- (153.41 KiB) Downloaded 426 times
Re: Salome wrong body in Elmer
have you got your solution yet? i am also trying to learn about the export of files from Salome to ElmerGUI.
there are some posts regarding the export of .unv file format to ElmerGUI. maybe they could be helpful for both of us.
viewtopic.php?f=9&t=152
viewtopic.php?f=9&t=1766
there are some posts regarding the export of .unv file format to ElmerGUI. maybe they could be helpful for both of us.
viewtopic.php?f=9&t=152
viewtopic.php?f=9&t=1766
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Re: Salome wrong body in Elmer
hi,
For Elmer software to recognize different bodies, some steps such as partitioning, exploding, creating groups, creating mesh groups should be carried out in Salome software.
The following posts can be helpful for these topics.
Post 1: For multiple bodies in 3D
http://www.elmerfem.org/elmerwiki/index ... e_to_Elmer
(Yes NickR7, i also used this same tutorial to learn about the required steps).
Post 2: The concept explained in Post 1 has been discussed for 2D Geometry
viewtopic.php?f=4&t=3248
yours
annier
For Elmer software to recognize different bodies, some steps such as partitioning, exploding, creating groups, creating mesh groups should be carried out in Salome software.
The following posts can be helpful for these topics.
Post 1: For multiple bodies in 3D
http://www.elmerfem.org/elmerwiki/index ... e_to_Elmer
(Yes NickR7, i also used this same tutorial to learn about the required steps).
Post 2: The concept explained in Post 1 has been discussed for 2D Geometry
viewtopic.php?f=4&t=3248
yours
annier
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
-
- Posts: 27
- Joined: 13 Aug 2013, 16:50
- Antispam: Yes
Re: Salome wrong body in Elmer
No I did not get the solution but I gave up with Salome. Now I am only using Comsol and GMSH for the mesh.
Re: Salome wrong body in Elmer
Hi akirahinoshiro,
i cannot not view your geometry file in Salome 5.1.3. i could just see the procedure menu in the left side of it and when i try to clicke them it does not proceed to show the geometry.
i have one question.
I suppose your geometry is in 3D. Did you explode your individual partitions into faces before grouping them?
there are some tutorials on CAELINUX (everything is shown step by step) about constructing geometry in Salome.
yours
annier
i cannot not view your geometry file in Salome 5.1.3. i could just see the procedure menu in the left side of it and when i try to clicke them it does not proceed to show the geometry.
i have one question.
I suppose your geometry is in 3D. Did you explode your individual partitions into faces before grouping them?
there are some tutorials on CAELINUX (everything is shown step by step) about constructing geometry in Salome.
yours
annier
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
-
- Posts: 27
- Joined: 13 Aug 2013, 16:50
- Antispam: Yes
Re: Salome wrong body in Elmer
The file was created with Salome 7 so I think this is the problem you cannot open the file.
Re: Salome wrong body in Elmer
hi,
did you go through the tutorials on CAELINUX?
yours
annier
did you go through the tutorials on CAELINUX?
yours
annier
Anil Kunwar
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice
Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice