Page 1 of 2
How to apply multiple solver on one body
Posted: 30 Mar 2021, 07:28
by sheetu
I want to perform an Acoustic duct mode analysis. How can I do that with Elmer GUI?
Re: How to apply multiple solver on one body
Posted: 30 Mar 2021, 12:23
by kevinarden
Re: How to apply multiple solver on one body
Posted: 18 Apr 2021, 09:18
by sheetu
Thank you!
how to define Mortar BC?
Posted: 18 Apr 2021, 09:32
by sheetu
how to define Mortar BC for analysis of electric motors?
Re: How to apply multiple solver on one body
Posted: 18 Apr 2021, 13:19
by kevinarden
Re: How to apply multiple solver on one body
Posted: 19 Apr 2021, 07:57
by sheetu
I'm unable to find how to Activates the use of edge element basis functions for the mortar conditions.
I'm working on 3-D BLDC PM motor and for maxwell stress analysis, I'm using MagDyn solver.
Re: How to apply multiple solver on one body
Posted: 19 Apr 2021, 12:08
by kevinarden
https://github.com/ElmerCSC/elmerfem/bl ... s/case.sif
look at this test case, and others in the test directory
Re: How to apply multiple solver on one body
Posted: 19 Apr 2021, 12:22
by kevinarden
Re: How to apply multiple solver on one body
Posted: 19 Apr 2021, 12:35
by sheetu
Ok, Sir. I'll go through this. Thank you.
Re: How to apply multiple solver on one body
Posted: 20 Apr 2021, 10:15
by sheetu
how to calculate transmission loss analysis of a muffler using Elmer? Can anyone give some reference?