I am new to Elmer/Ice, I compiled the Elmer with Ice on ubuntu following the instructions from this page: Installing Elmer in Ubuntu 14.04 using Cmake viewtopic.php?f=2&t=3742&sid=f2a8e8a277 ... 729435c4e5. Thanks to annier. A ctest was run after the install. Among the 344 tests, only 4 tests lost, those are:16:Damage,121:RotatingBCPoisson3DGeneric, 197:ThermalActuator, 204:ParticleAdvector2. It seems that all the tests of elmerice were passed. But when I run the examples --Test_MshGlacier under elmerice folder following the instruction of README.txt by the following command:
Code: Select all
elmerf90-nosh /home/chqiao/elmer/elmerfem/elmerice/Meshers/MshGlacier.f90 $ELMER_HOME/lib/libelmersolver.so -o MshGlacier
The terminal prompts that:
Application “elmerf90-nosh” uninstalled now, you can install it by the following command:
sudo apt-get install libelmer-dev
If I following the command of above to install the elmer-dev, the version of this install not compatible with the elmer compiled before, will leading error when running. I found that the elmerf90 was installed by type elmerf90 and press the RETURN, but got the same message quoted above when run elmerf90-nosh in terminal.
So, how to configure the make file for the early compile of Elmer to get the elmerf90-nosh install? Is there somebody else encounter this problems? Any advice will be appreciated!
Thanks in advance.
Yours
Qiao